K2 Industries
1.25" to 1.50" 90 Degree Silicone Reducer Hose 3-Ply Black
1.25" to 1.50" 90 Degree Silicone Reducer Hose 3-Ply Black
Couldn't load pickup availability
1.25" to 1.50" 90 Degree Silicone Reducer Hose ā 3-Ply Black
Step down coolant, vacuum, or boost lines with a precision 90-degree bend in one piece. This silicone hose handles temperature swings and vibration without cracking or splitting. Three-ply construction resists collapse under pressure and holds its shape through years of heat cycling.
Key Features
- 1.25" inlet to 1.50" outlet - Connects larger-diameter hoses to smaller ports without bunching or leaks.
- Three-ply silicone construction - Stands up to coolant, oil, and vacuum applications; resists ozone cracking.
- 90-degree fixed elbow - Eliminates the need for multiple hoses and fittings in tight engine bays.
Specs
- Material: Silicone
- Configuration: 90-degree reducer elbow
- Inlet diameter: 1.25 inches
- Outlet diameter: 1.50 inches
- Ply rating: 3-ply
- Color: Black
- Quantity: 1 piece
What's Included
- 1x silicone reducer hose
Frequently Asked Questions
Do I need clamps to install this hose?
Yes. Silicone hoses require hose clamps at both the inlet and outlet to seal properly. Use stainless or worm-drive clamps sized to fit your 1.25" and 1.50" connection points ā do not rely on friction alone.
Can I use this for a turbo boost line?
This hose handles vacuum and low-pressure boost applications. For high-boost turbocharged setups, confirm your maximum PSI and check that this silicone grade is rated for your system pressure ā most three-ply silicone tops out around 15 PSI sustained.
Will I need to prep this before connecting it to my cooling system?
No prep needed. Cut the hose cleanly if necessary, dry-fit it to confirm fitment, then clamp it down. Clean the connection ports on your engine or reservoir before final install to prevent sediment from blocking flow.
SKU: K2-1398-UNV-006-TSARK
Share
