Teskay
12H Graphene Ceramic Coating & Degreaser Kit | Mirror Shine & Hydrophobic
12H Graphene Ceramic Coating & Degreaser Kit | Mirror Shine & Hydrophobic
Couldn't load pickup availability
12H Graphene Ceramic Coating & Paint Prep Degreaser Kit
A complete two-step paint-preparation and graphene ceramic coating system designed to create a slicker, glossier and highly hydrophobic exterior surface while helping protect your vehicle's clear coat from everyday environmental exposure.
Manufacturer-Rated 12H Coating
The graphene-infused ceramic formula is manufacturer-rated at 12H hardness and designed to add a protective sacrificial layer over the vehicle's existing clear coat.
Strong Hydrophobic Effect
Creates a slick surface designed to encourage water to form beads and roll away more easily, helping reduce the amount of dirt and road grime that remains on the paint.
High-Gloss Finish
Enhances surface slickness and gloss to give properly prepared paint a deeper, more reflective wet-look appearance.
Why the Two-Step Kit Matters
The included prep solution helps remove residual wax, road oils and polishing residue before coating so the ceramic layer can bond to a cleaner surface.
A slick hydrophobic surface helps water and loose contaminants release more easily during routine washing.
The coating is designed to help isolate the clear coat from UV exposure, oxidation, moisture and common road contaminants.
One 60ml coating bottle is listed as typically sufficient for complete coverage of a standard mid-size sedan or SUV when applied correctly.
Coating, degreaser, spray head, polishing towel and protective gloves are included so the preparation and coating stages can be completed as one system.
Protection, Not Paint Correction
Ceramic coating does not remove deep scratches or repair damaged paint. Minor micro-marring may appear less noticeable after a high-gloss coating, but visible scratches, oxidation or paint defects should be corrected before the coating is applied.
Designed for a Slicker, Easier-to-Maintain Surface
Two-Phase Application
Coating performance depends heavily on surface preparation. The paint should be clean, free of old waxes and oils, and completely dry before the ceramic coating is applied.
Thoroughly wash the paint to remove loose road dirt, then lightly dry the exterior with a clean microfiber towel.
Spray the included paint-prep degreaser evenly over the target paint surface and allow it to work for approximately one minute.
Wipe away oils and residue with a clean dry cloth, rinse thoroughly with clean water and dry the paint completely.
Work on clean, completely dry paint and apply the coating evenly rather than attempting to build a heavy wet layer.
Apply several drops of graphene ceramic coating to a suitable coating applicator pad.
Spread the coating over the paint using overlapping back-and-forth passes in a cross-hatch pattern to promote even coverage.
Allow approximately 30 minutes for initial drying, around 2 hours for the surface to become touch-dry, and 48 hours for full curing.
Do not wash the vehicle during the full curing period. Avoid heavy rain and unnecessary water exposure for approximately 48 hours after coating application whenever possible.
Specifications & Kit Contents
| Attribute | Details |
|---|---|
| Product | Graphene Ceramic Coating & Paint Prep Degreaser Kit |
| Coating Formula | Graphene-Infused Ceramic Coating |
| Manufacturer Hardness Rating | 12H |
| Coating Volume | 60ml |
| Degreaser Volume | 60ml |
| Primary Surface | Automotive Painted / Clear-Coated Exterior Surfaces |
| Primary Benefits | Hydrophobicity / Gloss / Surface Slickness / Environmental Protection |
| Typical 60ml Coverage | Approx. One Standard Mid-Size Sedan or SUV |
| Initial Drying | Approx. 30 Minutes |
| Touch-Dry | Approx. 2 Hours |
| Full Cure | Approx. 48 Hours |
| Vehicle Compatibility | Universal Automotive Paint Care — Not Tesla-Specific |
Quick Answers
Is this product only for Tesla vehicles? +
No. This is a universal automotive paint-care product and is not dependent on a specific Tesla model or vehicle year.
Why should I use the degreaser first? +
The prep degreaser helps remove invisible oils, old wax and polishing residue so the ceramic coating can bond more directly to the clean clear-coat surface.
Is one 60ml bottle enough for a complete vehicle? +
The manufacturer states that one 60ml coating bottle is typically enough to cover a standard mid-size sedan or SUV. Actual usage depends on vehicle size and application technique.
Does the coating remove scratches? +
No. This product is primarily a protective coating rather than a paint-correction compound. Deep scratches and visible defects should be polished or repaired before coating for the best finish.
How long does the coating need to cure? +
Initial drying takes approximately 30 minutes, the surface becomes touch-dry in about 2 hours, and full curing requires approximately 48 hours.
Can I drive the car after applying the coating? +
The manufacturer states that the surface is touch-dry after approximately 2 hours and may be driven in clear weather. Avoid rain, washing and unnecessary water exposure until the full 48-hour curing period is complete.
What does “12H” mean on this product? +
12H is the hardness rating claimed by the product manufacturer for the cured coating. It should not be interpreted as making the vehicle paint scratch-proof or impact-proof.
Should the paint be polished before coating? +
If the paint has visible scratches, oxidation or other defects, complete the desired paint correction first. The coating will protect the condition underneath it rather than repair existing damage.
What is included in the kit? +
The kit includes one 60ml bottle of Graphene Ceramic Coating, one 60ml Paint Prep Degreaser, one spray nozzle, one microfiber polishing towel and one pair of protective gloves.
SKU: sku-48372106821847
