Teskay
19-Inch Gemini Wheel Covers for Model Y Juniper 2025+ (Set of 4)
19-Inch Gemini Wheel Covers for Model Y Juniper 2025+ (Set of 4)
Couldn't load pickup availability
19″ AirFlow Pro Wheel Covers for Tesla Model Y Juniper 2025+
Give your Model Y Juniper 19-inch Crossflow wheels a more aggressive turbine-inspired appearance while adding full-rim coverage, durable PC+ABS construction and a secure wheel-specific snap-on fit.
Directional AirFlow Design
Turbine-inspired directional surfaces are designed to help guide airflow around the rotating wheel and reduce unnecessary turbulence without relying on exaggerated efficiency claims.
Full-Wrap Rim Protection
The extended outer lip reaches over the exposed alloy rim edge, adding a replaceable protective layer against everyday scratches and light curb contact.
Precision Snap-On Retention
Wheel-specific molded clips engage with the original 19-inch wheel structure for fast tool-free installation and a secure full-perimeter fit.
Why AirFlow Pro Wheel Covers Stand Out
Combining polycarbonate with ABS provides a tougher, more temperature-resistant and more flexible wheel-cover structure than conventional low-cost ABS designs.
The full-wrap outer edge extends farther than the factory wheel-cover profile, helping protect more of the exposed alloy wheel perimeter.
Included foam cushioning tape installs along the inner perimeter to create a softer interface between the cover and the original alloy rim.
The directional blade layout is shaped to organize airflow around the wheel area while retaining a sportier appearance than a conventional flat aero cover.
No drilling, wheel modification or permanent adhesive is required, allowing the original wheel appearance to be restored later.
Designed for 19″ Juniper Crossflow Wheels
These are not universal 19-inch hubcaps. The retaining clips and overall geometry are molded specifically around the 2025+ Model Y Juniper factory 19″ wheel design. Wheel diameter alone does not confirm compatibility.
Built for Exterior Durability & Daily Driving
The directional design is intended to smooth airflow around the wheel area, but no verified drag-coefficient or range-improvement percentage is published for this product. Real-world efficiency depends on many vehicle and driving variables.
Tool-Free Snap-On Installation
Remove dirt and grit from the original wheel face and outer rim before fitting the new covers.
Install the supplied cushioning tape around the relevant inner perimeter of the wheel cover to create a buffer against the original alloy rim.
Rotate the wheel cover until the dedicated valve-stem cutout aligns correctly with the tire's original air valve.
Press firmly around the center and outer edge until the retaining clips are fully engaged with the original wheel.
Do not order based only on tire diameter. These covers are specifically molded for the factory 19″ wheel used on the 2025+ Model Y Juniper and will not fit the 2020–2024 Model Y wheel architecture.
Check every cover around its full perimeter before driving. After the first trip, inspect the clips again to confirm each wheel cover remains completely seated.
Specifications
| Attribute | Details |
|---|---|
| Product | 19″ AirFlow Pro Wheel Covers |
| Vehicle Compatibility | Tesla Model Y Juniper 2025+ |
| Compatible Wheel | Factory 19″ Crossflow / OEM Wheels |
| Not Compatible | Model Y 2020–2024 / Other Wheel Sizes / Different Wheel Designs |
| Wheel Size | 19 Inches |
| Material | Polycarbonate (PC) + ABS Composite |
| Available Styles | Stealth Black (Matte) / Jet Black (Glossy) / Stealth Black – Silver Accents / Stealth Black – Gray Accents |
| Coverage | Full Wheel Face + Extended Rim Edge |
| Retention | Precision-Molded Snap-On Clips |
| Valve Access | Dedicated Valve Stem Cutout |
| Wheel Protection | Full-Wrap Sacrificial Rim-Edge Coverage |
| Cushioning | Included Foam Inner-Perimeter Cushioning Tape |
| Aerodynamic Design | Directional Turbine / AirFlow Profile |
| Installation | Tool-Free Snap-On |
| Permanent Wheel Modification | Not Required |
| Set | 4 Wheel Covers |
Quick Answers
Which Model Y does this wheel cover fit? +
It is specifically molded for Tesla Model Y Juniper 2025+ equipped with the compatible factory 19″ wheel design.
Will it fit a 2020–2024 Model Y? +
No. The older Model Y uses a different wheel design and retaining geometry. These covers are for the refreshed 2025+ Model Y Juniper.
Will they fit any 19-inch wheel? +
No. The size and clip pattern must both match. These covers are designed for the original Model Y Juniper 19″ wheel architecture, not universal aftermarket 19″ wheels.
What material are the wheel covers made from? +
They use a PC+ABS composite that combines polycarbonate and ABS for improved impact resistance, flexibility and heat tolerance.
Do they protect the alloy rim edge? +
The full-wrap design extends over much of the exposed alloy rim edge and provides a replaceable sacrificial layer. It cannot guarantee protection from severe curb impacts.
Will the covers scratch my original wheels? +
The set includes foam cushioning tape that should be installed along the designated inner perimeter to create a softer buffer between the wheel cover and the alloy rim. Always clean both surfaces before installation so trapped grit cannot cause abrasion.
Do the AirFlow covers increase driving range? +
The directional profile is designed to help smooth wheel-area airflow and reduce turbulence, but no verified range-increase percentage is published. Real-world efficiency depends on speed, tires, weather, temperature and driving style.
Can I still inflate the tires without removing the covers? +
Yes. Each cover includes a dedicated valve-stem opening. Align it correctly with the original tire valve during installation.
Do I need tools to install them? +
No. After fitting the cushioning tape and aligning the valve opening, press the wheel cover evenly until all molded clips are fully engaged.
Can I use an automatic car wash? +
The manufacturer states that the snap-on retention system is designed for automatic car-wash use. Always verify that every cover is fully seated before entering a car wash.
What colors are available? +
Current options are Stealth Black (Matte), Jet Black (Glossy), Stealth Black with Silver Accents, and Stealth Black with Gray Accents.
How many wheel covers are included? +
The product is supplied as a complete four-wheel set for one vehicle.
SKU: TWC004-MB
