Teskay
3-in-1 Car Charging Power Cable for Starlink Mini
3-in-1 Car Charging Power Cable for Starlink Mini
Couldn't load pickup availability
3-in-1 Portable Power Cable for Starlink Mini
Power your Starlink Mini from a vehicle, USB-C PD source or compatible DC supply with one travel-ready cable. Designed for RVs, vans, camping, overlanding and remote work where the available power source can change from one location to another.
Vehicle Power Input
Connect to a compatible 12–24V vehicle accessory socket for mobile Starlink Mini use in cars, SUVs, vans, trucks and RVs.
100W+ USB-C PD Input
Power Starlink Mini from a compatible USB-C PD power bank, charger or portable power station capable of sustained 20V / 5A output.
Direct DC Power Option
A separate DC input provides another way to run Starlink Mini from compatible regulated DC power systems used in cabins, RVs and off-grid setups.
One Cable for Three Common Starlink Mini Power Sources
Use a compatible vehicle accessory socket when traveling in a car, SUV, camper van or RV instead of relying on the standard AC wall-power setup.
A suitable high-output USB-C PD power bank can run Starlink Mini when the dish is being used away from a vehicle or wall outlet.
Switch between a portable power station, DC power system or vehicle source without packing a different Starlink Mini cable for each situation.
Current manufacturer specifications identify 18AWG copper wiring to help carry the relatively high current needed by portable Starlink Mini power systems.
The dish-side DC plug includes a protective sealing gasket intended to improve resistance to rain, snow and normal outdoor moisture exposure.
Starlink Mini Only
This cable uses the Starlink Mini power connection and electrical requirements. It is not designed for Starlink Gen 1, Gen 2, Gen 3, or Flat High Performance systems.
Choose the Power Source That Fits the Trip
Use a compatible 12–24V cigarette-lighter / accessory socket.
For demanding continuous use, verify the vehicle socket, fuse and wiring can safely provide the required sustained current.
Connect to a USB-C PD source rated at 100W+ with 20V / 5A support.
Standard phone chargers and lower-output power banks may not provide enough sustained power for reliable Starlink Mini use.
Connect to a compatible regulated DC source for a cleaner permanently wired or portable off-grid setup.
Current technical imagery recommends a 12–24V DC source capable of at least approximately 5A / 100W.
A USB-C connector alone does not guarantee compatibility. For the current version, use a source that supports USB Power Delivery at 20V / 5A and 100W or more.
Built for Mobile & Outdoor Starlink Mini Setups
Best for compact battery, desk or nearby vehicle-power setups.
A versatile length for most vehicle, campsite and portable power-station layouts.
Extra reach for RVs, vans, roof-mounted dishes and power sources positioned farther from Starlink Mini.
Current manufacturer specification: approximately -20°C to 50°C (-4°F to 122°F).
The Starlink Mini DC plug uses a sealing gasket and is described as resistant to rain, snow and normal outdoor weather.
Keep power-source connectors, vehicle sockets and USB-C adapters protected from standing water. No verified complete IP submersion rating is published for the entire cable assembly.
Specifications
| Attribute | Details |
|---|---|
| Product | 3-in-1 Portable Power Cable for Starlink Mini |
| Compatibility | Starlink Mini Only |
| Starlink Gen 1 | Not Compatible |
| Starlink Gen 2 | Not Compatible |
| Starlink Gen 3 | Not Compatible |
| Flat High Performance | Not Compatible |
| Input 1 | Vehicle Cigarette-Lighter / Accessory Socket |
| Vehicle Voltage | 12–24V DC Compatible Source |
| Vehicle Power Note | Current Technical Imagery Recommends Approx. 13.8V / 7A Sustained Capability |
| Input 2 | USB-C Power Delivery |
| USB-C Requirement | 100W+ PD / 20V 5A Recommended Current Requirement |
| Standard Low-Power USB Charger | Not Suitable for Reliable Starlink Mini Power |
| Input 3 | Compatible DC Power Source |
| DC Source Guidance | Current Product Imagery Indicates 12–24V DC, Approx. 5A Minimum / 100W-Class Source |
| Starlink-Side Output | DC Connector for Starlink Mini |
| Wire Gauge | 18AWG Copper |
| Length Options | 6.5FT / 2M, 10FT / 3M, 16.4FT / 5M |
| Dish-Side Connector Seal | Protective Waterproof Gasket |
| Operating Temperature | Approx. -20°C to 50°C (-4°F to 122°F) |
| Outdoor Use | Rain / Snow / Sun Resistant Connector Design |
| Full Assembly IP Rating | Not Published |
| Installation | Plug-and-Play |
| Package | 1 × 3-in-1 Starlink Mini Power Cable in Selected Length |
Quick Answers
Is this cable made specifically for Starlink Mini? +
Yes. The output connector is designed for the Starlink Mini DC power port.
Does it work with Starlink Gen 2 or Gen 3? +
No. Gen 1, Gen 2, Gen 3 and Flat High Performance systems use different power requirements and/or connectors.
What are the three power-input options? +
Vehicle accessory / cigarette-lighter power, USB-C PD, and a compatible direct DC source.
Can I use an ordinary USB-C phone charger? +
Not unless it meets the required high-power USB-C PD profile. The current specification calls for 100W+ PD with 20V / 5A support.
Can I use a USB-C power bank? +
Yes, provided the power bank supports the required USB-C PD output profile and can sustain the load.
Will any 12V car socket power Starlink Mini? +
Not necessarily. The socket, fuse and vehicle wiring must support the required sustained current. Some low-rated accessory sockets may not reliably supply a 100W-class load.
Can I use it in a 24V truck or RV? +
The current manufacturer specification lists compatible 12–24V vehicle power input, provided the socket and electrical system can safely supply the required load.
Which cable length should I choose? +
Choose 6.5FT for compact setups, 10FT for most vehicle and portable-power setups, or 16.4FT when you need additional reach in an RV, van or rooftop installation.
Is the cable waterproof? +
The Starlink Mini DC connector includes a weather-resistant sealing gasket. No verified submersion-rated IP specification is published for the complete cable assembly.
Can I leave the connectors exposed in heavy rain? +
Keep the vehicle, USB-C and power-source connections protected from standing water even though the Starlink-side connector includes a weather-resistant seal.
Do I need a separate AC inverter? +
Not when using one of the compatible DC or USB-C PD power inputs. The cable is designed to avoid converting DC to AC and then back to DC for mobile Starlink Mini setups.
Is Starlink Mini included? +
No. This product includes the selected 3-in-1 replacement power cable only. Starlink Mini, mounts, batteries and power stations are sold separately.
SKU: SAD003-3
