Activated Carbon Cabin Air Filter for Model 3 & Model Y | PM2.5 HEPA (2-Pack)

Activated Carbon Cabin Air Filter for Tesla Model 3 / Model Y

Refresh your Tesla HVAC system with a 2-piece cabin filter set combining HEPA-style particulate filtration with an activated-carbon layer. Designed for direct replacement in compatible Model 3 and Model Y vehicles, the filter set helps capture airborne particles while reducing unwanted odors passing through the cabin ventilation system.

Multi-Layer Cabin Air Filtration

Particulate Filtration
The HEPA-style filter media is designed to capture airborne particulate matter entering the cabin through the HVAC system.

Activated Carbon
The carbon layer helps adsorb unwanted odors and some gaseous contaminants from outside air before they enter the cabin.

Routine HVAC Maintenance
Replacing a loaded or dirty cabin filter can help restore airflow compared with continuing to use a heavily contaminated filter.

Supplier-Rated Filtration Efficiency

The manufacturer states a filtration efficiency of 99.97% for particles ≥ 0.3 microns. This is a supplier-published specification for this product and is not presented here as an independently verified laboratory result.

⚠️ Cabin Filter — Not a Medical Device

This product is an automotive HVAC cabin filter. It should not be described as providing hospital-grade air, preventing illness, treating allergies, eliminating disease-causing organisms or guaranteeing specific health outcomes.

Filter Media

Vehicle Compatibility

Model YL Fitment Is Inconsistently Stated

The product-description text mentions Model YL, but the formal product-specification section specifically lists Model 3 and Model Y, including Highland and Juniper. For Model YL, confirm the filter compartment and selected SKU before promising compatibility.

Direct-Replacement Fit

The supplier states that the filters are designed to match the corresponding Tesla cabin-filter compartment and install without modification. This is an aftermarket replacement filter set, not a genuine Tesla OEM part.

Recommended Replacement Interval

The supplier recommends replacing the filters approximately every:

12–18 months
or

10,000–15,000 miles

Vehicles frequently driven in dusty, smoky, polluted or construction-heavy environments may require more frequent inspection and replacement.

Replacement Timing Varies

The 12–18 month / 10,000–15,000 mile interval is a supplier recommendation, not a fixed service requirement. Actual filter life depends on driving environment, HVAC use, dust exposure and filter condition.

When to Inspect the Cabin Filters

Reduced HVAC Airflow
A heavily loaded filter can restrict airflow through the ventilation system.

Persistent Musty Odor
Unpleasant odors when the HVAC system is running can indicate that the cabin filter should be inspected.

Visible Dirt or Debris
Inspect the filters if they appear heavily contaminated or have accumulated significant dust.

Harsh Driving Environment
Dusty roads, construction zones, heavy traffic and similar environments may shorten usable filter life.

Installation Overview

1. Access the Filter Compartment
Remove the required interior trim panels around the passenger-side center-console / glovebox area according to your vehicle configuration.

2. Remove the Filter Cover
Use the included T-20 Torx bit where required to open the cabin-filter access cover.

3. Remove the Existing Filters
Pull out both used cabin filters carefully to avoid spreading loose debris inside the HVAC compartment.

4. Check Airflow Direction
Follow the directional arrows printed on the replacement filters before inserting them.

5. Install Both New Filters
Insert the two replacement filters fully into the filter compartment.

6. Reinstall the Cover & Trim
Secure the filter access cover and reinstall any trim panels removed during installation.

Approx. 20-Minute Installation

Tesery estimates approximately 20 minutes for installation and includes a plastic pry bar and T-20 Torx bit with the set. Actual installation time can vary by vehicle generation and owner experience.

⚠️ Confirm Filter Orientation

Install the replacement filters according to the airflow arrows printed on the filter frame. Incorrect orientation can affect airflow and filter performance.

Maintain Normal HVAC Airflow

A clean cabin filter helps the HVAC system move air through the intended filter media without the restriction caused by a heavily clogged element.

If airflow remains unusually weak after replacement, inspect the filter orientation and HVAC system rather than assuming the new filter is the only possible cause.

Activated Carbon for Odor Control

Activated carbon is intended to adsorb certain odors and gaseous contaminants passing through the filter. Effectiveness varies with contaminant type, concentration, airflow and filter age.

⚠️ Does Not Guarantee Complete Odor Elimination

Activated carbon can help reduce some odors, but it cannot guarantee removal of every smell or gaseous contaminant. Persistent odors may originate from the evaporator, HVAC ducting, moisture or other cabin sources.

Specifications

⚠️ Exact Dimensions Are Not Published

The current exact product page does not publish filter length, width, thickness, pleat count, activated-carbon weight or pressure-drop data. Do not add these specifications unless separately confirmed for this exact SKU.

Package Includes

2 × Activated Carbon Cabin Air Filters

1 × Plastic Pry Bar Tool

1 × T-20 Torx Bit

1 × Installation Instructions

Quick Answers