Camera Cover for Tesla Model 3 / Model Y (6 PCS)

Ultra-Thin Sliding Camera Cover for Tesla Model 3 / Model Y

Add a simple physical cover over the cabin camera with an ultra-thin sliding design that opens or closes in seconds. Each cover uses an adhesive-backed ABS frame and a small sliding shutter, giving you direct manual control over when the camera lens is physically exposed.

Physical Camera Coverage When You Choose

Unlike a software setting, the sliding shutter provides a visible physical barrier over the camera lens when closed. Slide it open again whenever the camera needs to be unobstructed.

⚠️ Do Not Block the Camera When Vehicle Functions Require It

The cabin camera may be used by vehicle software or driver-monitoring functions depending on vehicle configuration and software version. Open the cover whenever the vehicle or a feature requires an unobstructed cabin camera. Do not use this accessory to defeat, bypass or interfere with driver-monitoring or safety-related systems.

Vehicle Compatibility

⚠️ Model-Year Information Is Inconsistent

The main product description lists Tesla Model 3 / Model Y without a specific year range, while current product-image metadata repeatedly identifies Model 3 2017–2024 and Model Y 2020–2024. Because the text does not explicitly confirm newer refreshed interiors, verify the cabin-camera size and surrounding trim before ordering for Model 3 Highland or Model Y Juniper.

Highland / Juniper Fitment Should Be Verified

The exact product page does not separately confirm Model 3 Highland or Model Y Juniper fitment. If the camera housing or available adhesive surface differs from earlier vehicles, this ultra-thin cover may not seat correctly.

Also Usable on Compatible Personal Devices

The supplier states that the same cover can also be used on compatible laptops, tablets and smartphones.

Fit depends on the device's camera position, available flat adhesive area and whether the 0.32-inch opening fully clears the lens.

Check Narrow-Bezel Devices Before Installation

The supplier specifically warns that some modern devices have narrow or borderless displays. Make sure the cover fits entirely on the available surface and does not overlap the active display area, sensors or other camera components.

Published Dimensions

ABS Sliding Construction

The supplier specifies ABS plastic for the cover body, with a small sliding panel and adhesive backing.

The exact ABS grade, adhesive manufacturer and tested sliding-cycle durability are not published.

Installation Guide

1. Clean the Camera Area
Remove dust, oils and residue from the surface surrounding the camera.

2. Keep the Camera Lens Exposed
Slide the cover to the open position so the circular opening is visible.

3. Remove the Adhesive Liner
Peel away the protective backing from the adhesive.

4. Align the Opening
Carefully position the 0.32-inch opening directly over the camera lens.

5. Press Into Place
Press the frame onto the surrounding trim while making sure the camera remains centered in the opening.

6. Test the Slider
Open and close the shutter several times and confirm that it moves smoothly without contacting the lens.

⚠️ Confirm Alignment Before Pressing the Adhesive Down

Incorrect alignment can partially obstruct the lens even when the shutter is open. Dry-position the cover first and confirm that the circular opening fully clears the camera before applying pressure.

Adhesive Residue Is Not Guaranteed

The supplier describes the cover as residue-free when removed, but actual adhesive residue can depend on surface condition, installation time, heat and removal technique. Remove slowly and clean any remaining residue with a surface-safe method.

⚠️ Driver-Monitoring Functions May Require an Open Camera

Keep the shutter open whenever driver-monitoring, assisted-driving or other vehicle functions require the cabin camera. Do not rely on this accessory to disable or bypass vehicle monitoring systems.

Cleaning & Care

Keep the Slider Clean
Use a soft dry cloth to remove dust from around the sliding mechanism.

Avoid Forcing the Shutter
If the slider becomes stiff, remove surface debris rather than applying excessive force.

Protect the Adhesive Area
Avoid saturating the cover with liquid cleaners, as moisture can weaken adhesive performance over time.

Specifications

Package Includes

6 × Ultra-Thin Sliding Camera Covers

Quick Answers