Teskay
Car Roof Suction Mount for Starlink Mini
Car Roof Suction Mount for Starlink Mini
Couldn't load pickup availability
Dual Suction Car Roof Mount for Starlink Mini
Take your Starlink Mini beyond the campsite with a reusable, tool-free vehicle mount that secures the dish to smooth glass and other suitable non-porous surfaces using two large adjustable suction cups — no roof rack, drilling or permanent vehicle modification required.
Dual Large Suction Cups
Two approximately 10cm / 3.93-inch suction cups provide a broad contact area on compatible smooth surfaces for stable temporary mounting.
Multi-Axis Adjustment
360° ball joints and adjustable pivot hardware let each suction cup adapt independently to suitable curved or angled vehicle glass surfaces.
Tool-Free & Reusable
Attach, remove and reposition the mount without drilling, adhesives or permanent roof hardware. Clean the suction surfaces before each installation.
Why This Starlink Mini Mount Stands Out
Mount the Starlink Mini on a suitable smooth vehicle surface without installing crossbars, rails or a permanent roof platform first.
The suction system is intended for clean, smooth, non-porous surfaces such as compatible vehicle glass rather than textured or heavily curved trim.
The center mounting bracket is shaped for the compact Starlink Mini rather than relying on a universal clamp around the dish housing.
Each side uses a ball joint and locking pivot so the mounting cups can be aligned with the actual shape of the installation surface.
The suction-based design can be removed, cleaned and reused instead of permanently dedicating the mount to one vehicle.
No Published Maximum Road Speed
The manufacturer markets the mount for vehicle travel and describes high-speed stability, but no verified maximum road speed, wind-load limit or suction pull-force rating is currently published. Suction security depends heavily on surface condition, temperature, installation quality and environment.
Dual 10cm Suction Cups with Multi-Axis Adjustment
Compatible with the compact Starlink Mini dish shown in the current product fitment guide.
Not compatible with the current Starlink Standard / Standard-style dish configurations shown in the fitment guide.
Not designed for the larger Starlink Mobile High Performance hardware.
Tool-Free Installation in Minutes
Select a smooth, clean, non-porous surface large enough for both suction cups to make full contact.
Remove dirt, dust, wax, oil and moisture from the contact area before installing the mount.
Loosen the adjustment knobs and align each suction cup so its entire sealing surface sits flush against the vehicle.
Engage each suction mechanism firmly and verify that the cups have formed a secure seal before loading the dish.
Install the Starlink Mini into the dedicated center bracket and confirm the retaining points are fully engaged.
Pull-test the mount by hand and inspect both suction seals, pivot locks and dish retention before every trip and after major temperature or weather changes.
Do not install over dirt, wax, textured paint, trim gaps, cracked glass or surfaces where either suction cup cannot make complete contact. Recheck suction regularly during use.
Wind load increases rapidly with vehicle speed. Because the current manufacturer does not publish a certified maximum road speed or wind-load rating, this page does not guarantee safe retention at any specific highway speed.
Specifications
| Attribute | Details |
|---|---|
| Product | Car Roof Suction Mount for Starlink Mini |
| Mount Series | SL-01 Pro |
| Compatible Dish | Starlink Mini |
| Starlink Standard | Not Compatible |
| Starlink Standard Actuated | Not Compatible |
| Starlink Mobile High Performance | Not Compatible |
| Suction Cup Quantity | 2 |
| Suction Cup Diameter | Approx. 10 cm / 3.93 in Each |
| Suction Adjustment | 360° Universal Ball Joint + Locking Pivot |
| Dish Angle Adjustment | Adjustable Through Mount / Pivot Structure |
| Installation Surface | Clean, Smooth, Non-Porous Compatible Surfaces |
| Vehicle Glass / Window Use | Supported on Suitable Smooth Glass Surfaces |
| Roof Rack Required | No |
| Drilling | Not Required |
| Adhesive | Not Required |
| Assembly | Manufacturer Describes Mount as Ready to Use Without Assembly |
| Reusable | Yes — Clean Suction Cups Before Reapplication |
| Weather Resistance | Manufacturer Describes Weather- and Wear-Resistant Construction |
| Exact Material | Not Published |
| Published Pull-Force Rating | Not Published |
| Published Load Rating | Not Published |
| Published Maximum Vehicle Speed | Not Published |
| Published Wind-Load Rating | Not Published |
| Starlink Mini Included | No — Mount Accessory Only |
| Package | 1 × Starlink Mini Dual-Suction Mount Assembly |
Quick Answers
Which Starlink model does this mount fit? +
It is designed specifically for Starlink Mini.
Does it fit Starlink Standard? +
No. Current product imagery specifically identifies Starlink Standard, Standard Actuated and Mobile High Performance hardware as incompatible.
How many suction cups does it use? +
The current mount uses two independently adjustable suction cups.
How large are the suction cups? +
Current TESKAY product imagery labels each suction cup at approximately 10cm / 3.93 inches in diameter.
Can the suction cups be angled independently? +
Yes. The current design uses 360° universal ball joints and adjustable locking pivots to accommodate suitable surfaces that are not completely flat.
Can I attach it to a glass roof? +
Yes, provided the glass area is smooth, intact, clean, dry and large enough for both suction cups to seal completely.
Can I install it on a textured roof surface? +
Textured, porous or uneven surfaces may prevent the suction cups from forming a reliable vacuum seal and are not recommended.
Does installation require drilling? +
No. The mount attaches entirely through its suction cups.
Do I need a roof rack? +
No roof rack or crossbar is required for the suction-mount installation.
Can the mount be removed and reused? +
Yes. Clean the suction cup surfaces and the next mounting location thoroughly before reinstalling.
Can I drive with the Starlink Mini mounted? +
The manufacturer markets the mount for vehicle travel, but no certified maximum road speed or wind-load limit is currently published. Always verify local requirements and inspect the mount carefully before vehicle movement.
Is a maximum safe speed published? +
No verified numeric maximum vehicle speed is published on the current Tesery or TESKAY product pages.
What happens if the suction cup gets dirty? +
Remove the mount and clean the suction cup thoroughly. Allow it and the mounting surface to dry before reapplying.
Is Starlink Mini included? +
No. This listing is for the suction mounting accessory. The Starlink Mini terminal and its power / data accessories are separate.
Are material, load rating and wind rating published? +
The manufacturer describes the mount as durable, weather-resistant construction, but exact material, certified load capacity, suction pull force and wind-load ratings are not currently published.
SKU: SBR006
