Teskay
Cybertruck Carbon Fiber Dashboard Covers (2pcs, Glare-Free)
Cybertruck Carbon Fiber Dashboard Covers (2pcs, Glare-Free)
Couldn't load pickup availability
Real Carbon Fiber Dashboard Covers for Tesla Cybertruck
Transform the Cybertruck's minimalist dashboard with a precision-shaped two-piece real carbon fiber overlay that adds a distinctive woven finish while helping protect the original trim from everyday scuffs, scratches and wear.
Genuine Carbon Fiber
Made from real carbon fiber rather than molded ABS with a printed carbon-look pattern, delivering authentic woven texture and a lightweight premium finish.
Everyday Dashboard Protection
Creates an additional protective surface over compatible original dashboard trim to help reduce scratches, scuffs, fingerprints and routine interior wear.
Cybertruck-Specific Fit
Each panel is shaped around the Cybertruck's distinctive dashboard geometry instead of relying on a universal flat sheet or vinyl wrap.
Why This Carbon Fiber Dashboard Set Stands Out
Genuine carbon fiber creates natural depth and weave detail that printed imitation-carbon surfaces cannot reproduce in the same way.
The complete set includes two custom-shaped carbon pieces designed around the corresponding dashboard and glove-box-facing trim sections.
The hard overlay takes the contact from hands, accessories and routine cleaning rather than leaving the factory surface directly exposed.
Installation uses the panel's shaped fit and adhesive retention rather than drilling holes into the original dashboard or permanently cutting factory trim.
Choose between a more subdued matte appearance or a glossy surface that visually emphasizes the woven carbon fiber pattern.
Real Carbon Fiber — Not Carbon-Look ABS
This product is listed as a genuine carbon fiber dashboard and glove-box trim set. It should not be confused with lower-cost ABS overlays that use hydro-dipped or printed carbon-fiber texture.
Real Carbon Fiber Across the Cybertruck Dashboard
Custom-Fit Overlay Installation
Place each carbon fiber section over its intended trim area before removing any adhesive backing to confirm orientation, edge alignment and clearance.
Remove dust, fingerprints, grease, dressing products and other residue from the original trim, then allow the area to dry completely.
Carefully align all molded contours and openings before allowing the adhesive to make full contact with the original dashboard.
Remove the adhesive liner progressively and position the carbon panel without forcing or excessively flexing the molded carbon fiber piece.
Apply firm, even hand pressure along the bonded areas to establish consistent adhesive contact without placing concentrated pressure on thin panel edges.
Verify that the finished installation does not interfere with the touchscreen, glove box, vents, trim movement or any visible factory openings.
The factory dashboard panels are not replaced. These carbon fiber pieces install over the corresponding original trim surfaces using their molded fit and adhesive retention.
No separate airbag-interference certification is published for this accessory. Install only on the intended trim areas shown for this product and never cover an airbag seam, vent, sensor, service opening or other safety-related component.
Specifications
| Attribute | Details |
|---|---|
| Product | Real Carbon Fiber Dashboard Trim Cover Set |
| Vehicle | Tesla Cybertruck |
| Compatibility | Cybertruck 2024+ |
| Quantity | 2 Pieces |
| Coverage | Corresponding Dashboard & Glove-Box-Facing Trim Areas |
| Material | Genuine Carbon Fiber |
| ABS Carbon-Look Construction | No |
| Finish Options | Matte / Glossy |
| Installation Type | Custom-Fit Overlay |
| Retention | Molded / Clip-Assisted Fit + Adhesive Retention |
| Drilling | Not Required |
| Cutting Factory Trim | Not Required |
| Factory Dashboard Removal | Not Required |
| Exact Carbon Weave Specification | Not Published |
| Published Thickness | Not Published |
| Published Weight | Not Published |
| Published Dimensions | Not Published |
| Published UV-Coating Specification | Not Published |
| Published Airbag Certification | Not Published |
| Package | 2 × Vehicle-Specific Real Carbon Fiber Dashboard Trim Covers |
Quick Answers
Is this genuine carbon fiber or ABS with a carbon pattern? +
It is listed as genuine carbon fiber. The current manufacturer specifically differentiates it from ABS imitation-carbon trim.
Is it dry carbon fiber? +
The current source confirms real carbon fiber but does not explicitly publish a dry-carbon manufacturing specification. This description therefore does not label it as dry carbon fiber.
Which Cybertruck years does it fit? +
Current manufacturer and TESKAY compatibility both list Tesla Cybertruck 2024+.
How many pieces are included? +
The set contains two vehicle-specific carbon fiber dashboard trim pieces.
Does this replace the original dashboard? +
No. It is an overlay trim set installed over the corresponding factory dashboard surfaces. The original dashboard remains in place.
What finishes are available? +
The current manufacturer description lists matte and glossy carbon fiber finishes.
Does installation require drilling? +
No drilling is specified. The current product uses a shaped overlay fit together with adhesive retention.
Do I need to remove the original dashboard panels? +
No. The carbon fiber pieces install over the compatible original dashboard surfaces.
Is 3M adhesive specifically confirmed? +
The current source confirms an adhesive peel-and-stick installation but does not reliably identify the adhesive manufacturer, so this page does not specifically claim 3M tape.
Does it interfere with the center touchscreen? +
The product is custom-shaped around the Cybertruck dashboard and current installation imagery shows the center display remaining fully accessible. Correct alignment is important.
Does it block the glove box? +
The corresponding panel is designed around the glove-box-facing trim rather than serving as a replacement for the glove-box mechanism. After installation, verify normal glove box operation.
Is the product certified not to interfere with the passenger airbag? +
No specific airbag-interference certification is published on the current product page. Install only on the intended trim surfaces and never cover any visible airbag seam or safety-related opening.
Can it be removed later? +
The overlay design can be removed, but adhesive should be released carefully with trim-safe methods to reduce the chance of residue or damage to the original surface.
Are thickness, weight and exact carbon weave published? +
No verified thickness, product weight, weave specification or exact dimensions are currently published, so this description does not invent those values.
SKU: TSLPK0910-matte
