Teskay
Dome Light Cover - Carbon Fiber Interior Mods for Tesla Model 3 / Y
Dome Light Cover - Carbon Fiber Interior Mods for Tesla Model 3 / Y
Couldn't load pickup availability
Genuine Carbon Fiber Dome Light Cover for Tesla Model 3 & Model Y
Transform the factory overhead light area with a precision-molded genuine carbon fiber overlay that adds a performance-inspired finish while helping protect the original trim from fingerprints, scuffs and everyday contact.
Genuine Carbon Fiber
Made from real carbon fiber rather than ABS plastic with a printed carbon pattern, giving the overhead console a more authentic weave and lightweight performance-inspired finish.
Covers High-Touch Trim
Adds a protective overlay to the exposed dome-light trim, helping reduce direct contact with the original surface during everyday use.
Simple 3M Adhesive Overlay
Installs over the existing dome-light trim with automotive adhesive — no replacement light assembly, drilling, wiring or permanent interior modification required.
Why This Dome Light Cover Stands Out
Instead of limiting carbon fiber to the dashboard or center console, this trim brings the same sporty material into the overhead lighting area.
Dedicated openings are molded around the factory reading-light and control areas so normal overhead-light operation remains accessible.
Each version follows the corresponding Tesla overhead light housing instead of using a universal flat carbon sheet.
Choose traditional glossy woven carbon, understated matte woven carbon or the more irregular forged-carbon look.
Dust and light fingerprints can normally be removed with a clean microfiber cloth or a lightly damp cloth.
Real Carbon Fiber — Not Carbon-Look ABS
The current product specification identifies the material as genuine carbon fiber. This product should not be confused with an ABS overlay carrying a printed or hydro-dipped carbon-fiber texture.
Choose Your Carbon Fiber Finish
Current selector: 2-piece configuration.
Current selector: dedicated 1-piece configuration.
Conservative confirmed fitment: 1-piece configuration.
Clean, Align, Peel & Press
Compare your factory dome-light assembly with the selected Model 3, Highland or Model Y version before removing the adhesive backing.
Remove dust, fingerprints, oil and interior-care residue from the original trim and allow the surface to dry fully.
Position the carbon cover without adhesive contact first and confirm that the lamp openings and control areas align correctly.
Peel away the protective backing from the pre-applied automotive adhesive once final positioning is confirmed.
Apply the cover carefully around the original light housing and press evenly around the perimeter to establish a secure bond.
Confirm that the reading lights and any exposed factory switches remain fully accessible after installation.
This is an exterior trim overlay for the existing overhead console. The original lamps, switches and electrical components remain in place.
Some current product selectors still describe the Model Y option as “2020-Present,” while another current Tesery regional selector limits the same part to 2020–2025.03. Because no dedicated Juniper variant is currently listed, this page treats Model Y 2020–2025.03 as the conservative confirmed range.
Specifications
| Attribute | Details |
|---|---|
| Product | Dome Light / Overhead Console Trim Cover |
| Material | Genuine Carbon Fiber |
| ABS Carbon-Look Plastic | No |
| Finish Options | Glossy Carbon Fiber / Matte Carbon Fiber / Forged Carbon Fiber |
| Model 3 | 2017–2023 |
| Model 3 2017–2023 Package | 2 Pieces |
| Model 3 Highland | 2024+ |
| Model 3 Highland Package | 1 Piece |
| Model Y Confirmed Range | 2020–2025.03 |
| Model Y Package | 1 Piece |
| Model Y Juniper 2025+ | Exact Fitment Not Reliably Confirmed — Check Before Ordering |
| Installation Type | Overlay Installation |
| Mounting Method | Pre-Applied Automotive 3M Adhesive |
| Drilling | Not Required |
| Wire Cutting / Splicing | Not Required |
| Factory Dome Light Removal | Not Required |
| Dome Light Function | Retained Through Dedicated Openings |
| Manufacturer-Listed Forming Process | Hot-Press / Steel-Mold Carbon Fiber Forming |
| Manufacturer-Listed Resin Cure | Approx. 150–180°C Process Temperature |
| Published Weight | Not Published |
| Published Dimensions | Not Published |
| Package | Vehicle-Specific Genuine Carbon Fiber Dome Light Cover(s) in Selected Finish |
Quick Answers
Is this genuine carbon fiber or carbon-look ABS? +
It is currently specified as genuine carbon fiber rather than ABS plastic with a printed carbon-fiber pattern.
Is this specifically dry carbon fiber? +
The current source identifies the material as real carbon fiber but does not consistently specify “dry carbon fiber,” so this description does not make that additional claim.
Does it fit Model 3 2017–2023? +
Yes. Select the dedicated Model 3 2017–2023 configuration, which currently includes two carbon-fiber cover pieces.
Does it fit Model 3 Highland? +
Yes. A dedicated Model 3 Highland 2024+ one-piece version is currently listed.
Does it fit Model Y? +
The conservative confirmed range is Model Y 2020–2025.03, with one dome-light cover in the current package.
Does it fit Model Y Juniper 2025+? +
Current source information is inconsistent. Some selectors say Model Y 2020–Present, while another current selector ends at 2025.03 and no dedicated Juniper version is listed. Confirm the overhead console shape before ordering for Model Y Juniper.
Why does the Model 3 version include two pieces? +
The current Model 3 2017–2023 configuration is sold as a two-piece dome-light trim set. The exact shapes are vehicle-specific, so use both pieces according to the supplied installation layout.
Will it block the dome lights? +
No. The current covers are molded with openings around the original reading-light areas so normal light output remains exposed.
Do I need to remove the original dome light? +
No. This is an overlay cover that installs directly over the existing trim.
Does installation require drilling or wiring? +
No. Installation uses the pre-applied automotive adhesive. No drilling, electrical wiring or vehicle coding is required.
What is the difference between Glossy and Matte? +
Glossy carbon has a more reflective surface that emphasizes the weave, while matte carbon reduces reflections for a subtler appearance.
What is Forged Carbon Fiber? +
The forged option has an irregular chopped-carbon appearance instead of the uniform woven pattern seen on conventional glossy or matte carbon fiber.
Can it be removed later? +
Yes. Because it is an adhesive overlay rather than a replacement assembly, it can generally be removed later using careful, trim-safe heat and adhesive-removal techniques.
Are exact dimensions and weight published? +
No verified overall dimensions or product weight are currently published. Fitment should therefore be selected by vehicle generation rather than by manually comparing dimensions.
SKU: TSL3629-A
