Teskay
Door Check Arm Covers for Tesla Model 3 / Model Y / Model YL
Door Check Arm Covers for Tesla Model 3 / Model Y / Model YL
Couldn't load pickup availability
Door Check Arm Protective Covers for Tesla Model 3 / Y / YL
Cover the exposed metal door check arms with a clean, vehicle-specific protective shell. These snap-on covers help shield the door limiter area from dust, mud, moisture and everyday grime while adding a more finished matte-black appearance.
🛡 Covers the Exposed Door Check Arm
Adds a protective shell over the exposed metal door check arm to help reduce direct contact with dust, mud, rain and road grime.
🧩 Vehicle-Specific Fit
Designed from vehicle-specific 3D scanning data to follow the shape of the compatible Tesla door check arm.
🔧 Tool-Free Snap-On Design
Internal retaining clips allow the covers to snap into place without adhesive, drilling, screws or permanent modification.
⬛ Matte Black Finish
The textured matte-black surface gives the exposed door-jamb area a cleaner, more integrated appearance.
Small Detail, Cleaner Door-Jamb Finish
Helps Keep the Door Check Area Cleaner
The cover sits over the exposed metal limiter arm and helps reduce direct accumulation of dust, mud, moisture and road salt on the covered surface.
More Finished Appearance
The matte-black shell conceals the unfinished-looking metal mechanism for a cleaner visual transition when the door is open.
Removable for Service
The snap-on construction allows the cover to be removed later if access to the door check mechanism is required.
Helps Shield the Door Check Arm From
| Exposure | Protective Role |
|---|---|
| Dust | Helps reduce direct dust accumulation on the covered metal surface |
| Mud & Road Grime | Adds an outer barrier around the exposed mechanism |
| Rain & Moisture | Helps limit direct surface exposure |
| Road Salt | Helps reduce direct contact with salty road residue |
ABS Construction
| Attribute | Supplier Specification |
|---|---|
| Material | ABS Plastic |
| Finish | Textured Matte Black |
| Temperature Resistance | Supplier Describes the ABS as Heat-Resistant |
| Attachment | Internal Snap-On Clips |
Vehicle Compatibility
| Vehicle | Supported Years | Set Quantity |
|---|---|---|
| Tesla Model 3 Highland | 2024+ | 2 PCS |
| Tesla Model 3 | 2017–2023.10 | 2 PCS |
| Tesla Model Y Juniper | 2025+ | 4 PCS |
| Tesla Model Y | 2020–2025.03 | 4 PCS |
| Tesla Model YL | 2026+ | 4 PCS |
Different Vehicles Use Different Set Quantities
Model 3 / Model 3 Highland: 2-piece set.
Model Y / Model Y Juniper / Model YL: 4-piece set.
Choose the vehicle-specific option shown in the product selector.
⚠️ Select the Correct Vehicle Configuration
Model 3 and Model Y configurations use different set quantities and may use different cover geometry. Do not order only by appearance—select the vehicle-specific option that matches your Tesla.
Designed Around Normal Door Movement
Tesery states that the covers use a low-profile design intended to preserve the normal movement range of the compatible door check arm.
After installation, always open and close the door slowly once to confirm that the cover does not bind, scrape or interfere with the door mechanism.
Tool-Free Installation
1. Identify the Door Check Arm
Open the door and locate the exposed metal limiter arm between the door and body.
2. Clean the Area
Remove loose dust, mud and debris from the check arm and surrounding mounting area.
3. Match the Cover
Confirm that the molded cover corresponds to the correct installation position.
4. Align the Internal Clips
Position the cover over the door check arm and align the retaining clips with the compatible mounting shape.
5. Snap Into Place
Press evenly until the cover is fully seated.
6. Test Door Movement
Slowly open and close the door to confirm full movement without rubbing or binding.
No Adhesive Required
The covers use engineered internal clips and do not require double-sided tape, glue, screws or drilling for installation.
⚠️ Check Door Operation After Installation
If a cover feels loose, scrapes the door frame or restricts the movement of the door check arm, remove it and verify the correct position and vehicle fitment before driving.
Specifications
| Attribute | Details |
|---|---|
| Product Type | Door Check Arm Protective Cover |
| Material | ABS Plastic |
| Finish | Textured Matte Black |
| Installation | Internal Snap-On Clips |
| Tools Required | None |
| Adhesive Required | No |
Package Configuration
Model 3 / Model 3 Highland: 2 × Door Check Arm Covers
Model Y / Model Y Juniper / Model YL: 4 × Door Check Arm Covers
Quick Answers
What does this product cover?
It installs over the exposed metal door check arm located between the door and vehicle body.
What material is it made from?
Tesery specifies heavy-duty, heat-resistant ABS plastic with a textured matte-black finish.
Do I need adhesive?
No. The covers use internal snap-on clips and require no tape or glue.
Do I need installation tools?
No. Tesery describes the installation as tool-free.
Will the covers interfere with the door?
Tesery states that the low-profile design is engineered to preserve the normal range of door movement. Always test the door slowly after installation to confirm correct fit.
Does it fit Model 3 Highland?
Yes. The current compatibility table lists Model 3 Highland 2024+.
Does it fit Model Y Juniper?
Yes. Tesery currently lists Model Y Juniper 2025+.
Does it fit Model YL?
Yes. Tesery currently lists Model YL 2026+.
Why does Model 3 include 2 pieces while Model Y includes 4?
The current product selector uses a 2-piece configuration for Model 3 / Model 3 Highland and a 4-piece configuration for Model Y / Model Y Juniper / Model YL. Choose the option specifically listed for your vehicle.
SKU: sku-49799059964119
Share
