Teskay
Dragon Scale Tail Lights for Model 3/Y
Dragon Scale Tail Lights for Model 3/Y
Couldn't load pickup availability
Dragon Scale LED Tail Lights for Tesla Model 3 & Model Y
Give your Tesla a dramatically different rear signature with dark-housing LED tail lights featuring a distinctive dragon-scale light pattern, sequential turn signals and vehicle-specific plug-and-play fitment.
Dragon Scale LED Signature
Individual illuminated segments form a curved scale-inspired pattern across the inner and outer tail-light sections for a rear appearance clearly different from the factory light design.
Sequential Turn Signals
The dedicated upper LED turn-signal section illuminates in sequence for a flowing directional indication rather than a simple static flash.
OEM-Position Replacement
Vehicle-specific housings replace the corresponding original rear lamp assemblies and connect through the matching vehicle interfaces without aftermarket exterior light strips.
Why Dragon Scale Tail Lights Stand Out
The dark internal housing visually blends into the rear of the car when the lamps are off, then reveals the segmented LED pattern when illuminated.
LED illumination responds without the warm-up delay associated with conventional incandescent bulbs.
The design continues across both the body-side and trunk-lid lamp sections so the illuminated pattern reads as one coordinated rear-light design.
Current manufacturer specifications identify a durable ABS lamp housing combined with a polycarbonate outer lens.
Current installation guidance describes a direct plug-and-play replacement without cutting factory wiring or adding vehicle coding.
Manufacturing Plant Matters
Fremont / Texas-built:
Red turn-signal configuration.
Shanghai / Berlin-built:
Amber turn-signal configuration.
Select the vehicle's actual manufacturing plant rather than choosing only by sales country.
A Completely Different Rear Light Signature
The upper signal section illuminates progressively for a directional flowing turn-signal effect.
Current product imagery shows a separate white LED section within the inner lamp assembly.
Individual red illuminated blocks form the recognizable Dragon Scale pattern across the lamp.
Older source text references “low beam,” “high beam” and “daytime running light” functions even though this product is a rear tail-light assembly. Those terms have been excluded here rather than presented as verified tail-light functions.
Select the Model and Manufacturing Plant Carefully
Verify the exact Model 3 or pre-Juniper Model Y before ordering. Highland and Juniper use different rear-light designs.
Determine whether the vehicle was built at Fremont/Texas, Shanghai or Berlin because the turn-signal configuration differs.
Open the trunk and access the original inner and outer tail-light mounting points according to the installation guide.
Disconnect the corresponding factory connectors and remove the original rear lamp assemblies carefully.
Fit the vehicle-specific inner and outer replacement lamp sections into the corresponding original body positions.
Before final trim reassembly, verify normal rear illumination and both left and right turn-signal operation.
Current manufacturer and TESKAY installation information describes direct vehicle-specific electrical connections with no factory-wire cutting or additional coding required.
Model 3 Highland and Model Y Juniper use redesigned rear-light architectures and are not included in the current Dragon Scale selector.
Rear turn-signal color requirements vary by market. If the vehicle's original production configuration does not match local registration requirements, confirm the required signal color before ordering.
Specifications
| Attribute | Details |
|---|---|
| Product | Dragon Scale LED Tail Light Replacement |
| User-Supplied Variant | No Variant ID Included in URL — Select Model & Manufacturing Plant |
| Model 3 | 2017–2023.10 |
| Model Y | 2020–2025 Current Selector / Pre-Juniper Only |
| Model 3 Highland | Not Compatible |
| Model Y Juniper | Not Compatible |
| Manufacturing Plant Options | Fremont / Texas Giga / Shanghai Giga / Berlin Giga |
| Fremont / Texas Turn Signal | Red |
| Shanghai Turn Signal | Amber |
| Berlin Turn Signal | Amber |
| Turn-Signal Type | Sequential LED |
| Main Visual Design | Red Dragon-Scale Segmented LED Pattern |
| Housing Material | ABS |
| Lens Material | Polycarbonate |
| Installation Position | Original Rear Tail-Light Locations |
| Configuration | Vehicle-Specific Inner & Outer Rear Light Assemblies |
| Electrical Installation | Plug-and-Play |
| Wire Cutting / Splicing | Not Required |
| Vehicle Coding | Not Required by Current Manufacturer Instructions |
| Current TESKAY Fitment Note | Product Copy Identifies Left-Hand-Drive Fitment |
| Right-Hand-Drive Compatibility | Confirm Before Ordering |
| Published Wattage | Not Published |
| Published Lumen Output | Not Published |
| Published IP Rating | Not Published |
| DOT / E-Mark Certification | Not Verified on Current Product Page |
| Published Dimensions | Not Published |
| Package | Matching Vehicle-Specific Dragon Scale Rear Tail-Light Assembly Set; Exact Detailed Packing List Not Separately Published |
Quick Answers
Which exact variant is selected in the supplied link? +
The supplied URL does not include a variant ID. Select both the correct vehicle and manufacturing plant before ordering.
Does it fit Tesla Model 3? +
Yes. The current selector lists Model 3 2017–2023.10.
Does it fit Model Y? +
Yes. The current selector lists Model Y 2020–2025. This refers to the pre-Juniper rear-light design.
Does it fit Model 3 Highland? +
No. Model 3 Highland uses a different rear-light design and is not included in the current selector.
Does it fit Model Y Juniper? +
No. Model Y Juniper uses a redesigned rear lighting system and requires a different product.
Why do I need to choose the manufacturing plant? +
The turn-signal configuration differs by manufacturing plant. Current specifications use red turn signals for Fremont/Texas vehicles and amber signals for Shanghai/Berlin vehicles.
How can I tell where my Tesla was built? +
Check your vehicle information, VIN/manufacturing details or original vehicle documentation. Do not assume production plant solely from the country where the car is currently registered.
Are the turn signals sequential? +
Yes. The current manufacturer describes the turn-signal section as sequential, illuminating progressively in a flowing pattern.
Are the turn signals always amber? +
No. Fremont/Texas configurations currently use red turn signals, while Shanghai/Berlin configurations use amber.
What if my US-built car has been imported to a country requiring amber indicators? +
Confirm the required local turn-signal color before ordering. Imported vehicles may need a configuration that differs from their original factory-market specification.
Is this just a tail-light cover? +
No. This is an actual replacement LED tail-light assembly, not an overlay, tint film or decorative cover.
Does installation require cutting factory wires? +
No. Current product documentation describes the assembly as plug-and-play without factory-wire cutting or splicing.
Does installation require coding? +
No additional vehicle coding is identified as necessary in the current installation information.
Is it compatible with right-hand-drive vehicles? +
Current TESKAY product copy specifically references left-hand-drive vehicles. Right-hand-drive compatibility should therefore be confirmed before ordering rather than assumed.
Are the lights DOT or E-Mark certified? +
A verified DOT or E-Mark certification is not published on the current product page, so this description does not claim one.
Are wattage, lumens or an IP waterproof rating published? +
No verified wattage, lumen output, overall dimensions or IP waterproof rating are currently published, so those specifications are not invented here.
SKU: TSL2314-US
