Teskay
Dry Carbon Fiber Armrest Cover for Tesla Model 3/Y
Dry Carbon Fiber Armrest Cover for Tesla Model 3/Y
Couldn't load pickup availability
Real Molded Carbon Fiber Armrest Cover for Tesla Model 3 & Model Y
Transform the original padded center armrest into a full carbon-fiber focal point with a rigid, vehicle-specific shell that wraps both the top surface and visible side profile while preserving normal armrest opening and storage access.
Genuine Molded Carbon Fiber
Made from real carbon fiber rather than printed ABS, hydro-dipped plastic or vinyl film, giving the armrest a true woven or forged carbon appearance.
Full-Profile Molded Fit
The rigid shell follows the original center-armrest lid and extends around the visible sides for a more complete carbon-fiber appearance than a flat top-only trim piece.
Adhesive-Free Retention
A custom molded locating structure grips the original armrest shape without double-sided tape, glue, drilling or permanent modification.
Why This Carbon Fiber Armrest Cover Stands Out
The rigid shell sits over the original upholstery, helping shield the visible armrest surface from everyday contact, scuffs and wear.
Unlike a simple flat decorative plate, the molded shell wraps downward around the visible armrest sides for a more continuous finished appearance.
The front opening and underside geometry are shaped around the original armrest release area so the center console compartment can still open normally when the cover is correctly seated.
Choose traditional glossy weave, lower-reflection matte weave or the irregular technical appearance of forged carbon.
Because the current design does not rely on adhesive, the cover can be removed later without first peeling away double-sided tape from the original armrest.
Rigid Carbon Shell — Not a Soft Armrest Pad
This product changes the visible surface and feel of the original center armrest. It is a rigid real-carbon-fiber molded cover, not a padded slip-on cushion or soft leather armrest extension.
Choose the Carbon Finish That Matches Your Interior
Molded, Adhesive-Free Installation
Compare the top surface, side profile and front release opening of your original armrest with the product images before installation.
Remove dust and loose debris and allow the armrest to dry completely so nothing is trapped underneath the molded shell.
Position the cover in the correct orientation and align its front opening with the original armrest release area.
Press progressively around the shell so the molded locating points seat evenly around the original padded lid.
Verify that the cover sits evenly without rocking, lifting or excessive gaps around the side profile.
Open and close the storage lid gently to confirm the release, latch and hinge movement remain unobstructed.
The current product design uses its molded internal locating structure for retention. Double-sided adhesive is not required or included with the latest documented version.
This shell follows the original pre-refresh center-armrest shape. Model 3 Highland 2024+ and Model Y Juniper / refreshed Model Y use a different center-console design and require a different armrest cover.
Specifications
| Attribute | Details |
|---|---|
| Product | Real Molded / Dry Carbon Fiber Center Armrest Cover |
| Model 3 Compatibility | 2017–2023 |
| Model Y Compatibility | 2020–2025.02 |
| Model 3 Highland | Not Compatible |
| Model Y Juniper | Not Compatible |
| Steering Side | No Separate LHD / RHD Variant Listed |
| Material | Genuine Molded Carbon Fiber |
| Product Type | Rigid Overlay Shell for Original Center Armrest Lid |
| Covered Area | Top Surface + Visible Side Profile of Center Armrest / Storage Lid |
| Finish Options | Glossy / Matte / Forged |
| Glossy SKU | TSL3618-A |
| Matte SKU | TSL3618-B |
| Forged SKU | TSL3618-C |
| Installation Method | Custom Molded Locating / Retention Structure |
| Double-Sided Tape | Not Required |
| Glue | Not Required |
| Drilling | Not Required |
| Armrest Opening | Preserved When Correctly Installed |
| Original Upholstery Removed | No |
| Published Thickness | Not Published in Current Technical Page |
| Published Weight | Not Published |
| Published Dimensions | Not Published |
| Package Contents | 1 × Real Carbon Fiber Center Armrest Cover |
Quick Answers
Is this real carbon fiber or carbon-look ABS? +
It is a genuine molded carbon-fiber shell, not printed plastic, vinyl wrap or carbon-look ABS.
Is it a soft padded armrest cover? +
No. It is a rigid carbon-fiber shell installed over the original padded armrest lid.
Which Model 3 years fit? +
The current vehicle option covers Tesla Model 3 2017–2023.
Which Model Y years fit? +
The current vehicle option covers pre-refresh Model Y 2020 through February 2025.
Does it fit Model 3 Highland? +
No. Model 3 Highland uses a different center-console and armrest design.
Does it fit Model Y Juniper? +
No. The refreshed Model Y / Juniper center armrest has a different shape and requires a dedicated product.
Does it require 3M double-sided tape? +
No. The current documented version is secured by a molded locating structure and does not require adhesive.
Does installation require drilling? +
No drilling or permanent modification is required.
Can I still open the center storage compartment? +
Yes. The molded cover leaves access around the original release area. After installation, test the lid gently to make sure the latch and hinge move freely.
Which finish shows fingerprints the most? +
Glossy provides the strongest reflections and normally makes touch marks easier to see. Matte is the lower-reflection choice.
What is the difference between woven and forged carbon? +
Glossy and Matte use a regular woven carbon pattern. Forged uses an irregular fragmented carbon appearance.
How should I clean the carbon surface? +
Wipe the surface with a soft damp cloth. Avoid abrasive pads or aggressive cleaners that may mark the finish.
What exactly comes in the package? +
The package includes one real carbon-fiber center armrest cover. Other carbon-fiber console accessories shown in styled vehicle photos are not included.
SKU: TSL3618-A
