Factory-Sync RGB Ambient Light Kit for Model 3 Highland/ Y Juniper/ YL

Factory-Sync RGB Ambient Light Kit for Tesla Model 3 Highland / Model Y Juniper / Model YL

Expand the factory ambient-light experience with synchronized RGB lighting for the steering wheel, air vents and cup holder area. The system follows the vehicle's existing ambient-light color settings in real time while also supporting custom RGB colors and music-reactive lighting modes.

One Ambient-Light System, Synchronized Together

The supplier states that the kit mirrors the vehicle's existing ambient-light color in real time. When the factory ambient-light color is changed, the added steering-wheel, air-vent and cup-holder lighting follows the same setting without requiring duplicate color adjustment.

No Separate App Is Required for Factory-Sync Mode

For factory synchronization, the supplier states that the added lighting follows the vehicle's ambient-light setting directly. The page does not require a separate phone app to duplicate the factory color setting.

Available Lighting Zones

Vehicle Compatibility

Air Vent & Cup Holder Kits Fit All Three Listed Models

The supplier specifically states that the air-vent and cup-holder ambient-light kits are compatible with Model 3 Highland 2024+, Model Y Juniper 2025+ and Model YL 2026+.

⚠️ Model 3 Highland Steering Wheel Kit Must Match Production Date

The Model 3 Highland steering-column design changed during production. Choose the steering-wheel ambient-light version according to your vehicle's build date:

2024–2025.09: Without Stalk version
2025.10+: With Stalk version

Check your delivery or production information before ordering a steering-wheel lighting kit.

Model Y Juniper / Model YL Steering Wheel Versions

The supplier states that the steering-wheel ambient-light kit is compatible with Model Y Juniper and Model YL configurations equipped with the physical turn-signal stalk arrangement used on those listed versions.

⚠️ Not for Earlier Model 3 / Model Y Generations

This exact kit is designed for the refreshed Model 3 Highland, Model Y Juniper and Model YL interior architecture. Do not assume compatibility with Model 3 2017–2023 or pre-Juniper Model Y interiors.

Lighting Modes

Designed Without Vehicle Software Modification

The supplier states that the kit connects through the vehicle's reserved factory connector and does not decode or modify the vehicle software. Based on the supplier's description, it is designed not to interfere with normal OTA software updates.

Software Compatibility Is Supplier-Stated

The OTA compatibility statement comes from the supplier. Future vehicle hardware or software changes can affect third-party accessories, so this should not be presented as a permanent guarantee for every future Tesla update.

Plug-In Installation

1. Confirm Your Vehicle & Kit
Verify the vehicle model, selected lighting zones and, for Model 3 Highland steering-wheel kits, the correct stalk version.

2. Power Down Before Interior Electrical Work
Follow the installation instructions supplied with the kit before accessing factory connectors.

3. Remove the Required Trim Carefully
Access the mounting locations and reserved connectors according to the supplied photo / video guide.

4. Connect the Factory-Style Plugs
Connect the kit to the intended factory connector without cutting the original wiring.

5. Install the Lighting Components
Secure the selected steering-wheel, air-vent and/or cup-holder components in their intended factory-style mounting areas.

6. Test Before Reassembly
Confirm factory color synchronization, custom color operation and the selected lighting zones before reinstalling all trim.

Approx. 45–60 Minute Installation

The supplier estimates approximately 45–60 minutes for installation of the complete kit. Actual time can vary with selected zones, experience and vehicle configuration.

⚠️ Professional Installation Is Recommended if You Are Unfamiliar With Interior Trim

The supplier states that most owners can complete the installation using the provided instructions. However, the process involves removing interior trim and accessing electrical connectors. If you are not comfortable working around steering-column or interior electrical components, professional installation is recommended.

⚠️ Steering Wheel Area Must Remain Fully Functional

For steering-wheel versions, the lighting components and wiring must not interfere with steering movement, stalk operation, buttons, scroll wheels, horn function or the center airbag module. Do not use the vehicle until all steering-wheel controls operate normally.

⚠️ Keep Wiring Away From Airbag Deployment Areas

Do not route added wiring across airbag covers, steering-wheel airbag components or other restraint-system deployment paths. Follow the supplied routing instructions carefully.

Use Brightness & Dynamic Modes Responsibly

Very bright or rapidly changing interior lighting can be distracting at night. Use an appropriate brightness and avoid dynamic lighting modes if they interfere with visibility or driver concentration.

Specifications

⚠️ Unpublished Specifications

The current exact product page does not publish LED wattage, current draw, color-temperature values, LED-chip model, lumen output, controller specifications, wire gauge, IP rating or detailed material composition. Do not add these values unless separately confirmed for this exact kit.

Package Configuration

Package contents depend on the selected kit:

Steering Wheel Ambient Light: Steering-wheel lighting components for the selected vehicle version

Cup Holder Ambient Light: Cup-holder lighting components

Air Vent Ambient Light: Air-vent lighting components

Combination Sets: Components for the selected two-zone configuration

Full Set: Steering Wheel + Air Vent + Cup Holder lighting components

Package Contents Vary by Selected Kit

Do not assume every order includes all three lighting zones. The current product offers individual zones, two-zone combinations and a full three-zone set.

Quick Answers