Front Seat Back Storage Hooks for Tesla Model S / X 2023+ (2pcs)

Front Seat Back Storage Hooks for Tesla Model S / Model X 2023+

Add convenient hanging storage behind the front seats of your Tesla Model S or Model X. These vehicle-specific ABS hooks snap into the original seat-back gap without tools, glue, drilling or permanent modification.

Keep Everyday Items Off the Floor

Handbags & Tote Bags
Provides a dedicated hanging point so bags do not have to sit loose on the seat or footwell.

Shopping Bags
Helps organize lightweight shopping bags and keep them easier to reach.

Umbrellas
Useful for keeping compact umbrellas suspended instead of rolling around on the floor.

Small Daily Essentials
Suitable for other lightweight items that can be safely hung from the hook without exceeding its rated load.

Supplier-Rated Load: Up to 1.0 kg per Hook

Tesery lists a maximum load capacity of up to 1.0 kg for each hook. Use the hooks for lightweight everyday storage rather than heavy cargo.

⚠️ Do Not Overload the Hooks

The 1.0 kg figure is the supplier's stated maximum per hook. Do not hang heavy, sharp or high-value items that could damage the hook, seat trim or surrounding interior if they shift or fall during driving.

ABS Construction

Curved Clamping Structure

The supplier states that the hook uses smooth, curved contact surfaces and a pressure-distributing design to grip the seat-back gap without cutting into or puncturing the upholstery.

As with any clip-on interior accessory, proper alignment is important to avoid unnecessary pressure on the surrounding trim.

⚠️ Check the Contact Area Regularly

Although Tesery states that the curved structure is designed to protect the original seat surface, contact marks can vary with installation position, load, temperature and long-term use. Remove the hook if you notice excessive pressure or marking.

Vehicle Compatibility

⚠️ Designed for 2023+ Seat-Back Geometry

This product is custom-molded for the front seat backrest gap used in Tesla Model S and Model X 2023+. Compatibility with earlier Model S / X seats or other Tesla models is not stated on this exact product page.

Designed to Move With the Seat

Tesery states that the hook moves together with the front seat and is designed not to interfere with normal forward/backward adjustment or electronic seat recline when correctly installed.

⚠️ Test Full Seat Movement After Installation

After installing the hooks, move the front seats through their normal adjustment range. Confirm that the hooks and any hanging items remain clear of seat rails, trim, wiring, rear passengers and other moving components.

Low-Profile Design

The supplier states that the hooks sit close to the seat-back contour to reduce protrusion into the passenger area.

Before driving, make sure any hanging object does not interfere with rear-passenger legroom or become a loose object during sudden braking.

⚠️ Secure Hanging Items Before Driving

Do not hang hard, sharp or heavy objects that could swing toward passengers or become projectiles during emergency braking or a collision. Use the hooks only for lightweight everyday storage.

Quick Snap-In Installation

1. Locate the Seat-Back Gap
Identify the compatible gap on the rear side of the front seat.

2. Check the Area
Make sure the mounting area is clean and free from loose objects.

3. Align the Hook
Position the molded hook with the compatible seat-back gap.

4. Press Into Place
Push the hook carefully into the intended gap until it seats securely.

5. Check Stability
Pull gently on the hook by hand to confirm it is properly seated.

6. Test Seat Adjustment
Move and recline the seat to verify that the hook does not interfere with normal seat operation.

No Glue, Drilling or Cutting

The snap-in design uses the existing seat-back gap. No adhesive, screws, drilling, cutting or permanent modification are required.

Specifications

⚠️ Exact Dimensions Are Not Published

The current supplier page does not publish the hook dimensions, weight, ABS thickness or a detailed engineering load-test method. Do not add those specifications unless they are separately confirmed for this exact product.

Package Includes

2 × Front Seat Back Storage Hooks

Quick Answers