Hidden Rear Trunk Refrigerator for Tesla Model 3 Highland 2024+

Hidden Rear Trunk Compressor Refrigerator for Tesla Model 3 Highland 2024+

Add concealed cooling and warming storage to the rear trunk of your Tesla Model 3 Highland. This custom-fit 10L compressor refrigerator installs into the rear-trunk storage area and offers adjustable cooling, warming and multiple control methods without taking over the main cargo floor.

Hidden Temperature-Controlled Storage

Uses the Rear-Trunk Storage Area
The refrigerator is engineered around the Model 3 Highland rear-trunk contours so it can add cooled or warmed storage without permanently occupying the main cargo floor.

Useful for Daily Driving & Road Trips
Store compatible drinks, snacks, meals and other temperature-sensitive everyday items during trips.

Cooling or Warming
Switch between refrigeration and warming modes depending on the type of item you are carrying.

10-Liter Capacity

Capacity Examples Are Approximate

Actual storage capacity depends on bottle, can and container dimensions. The supplier's can and bottle counts should be treated as approximate packing examples rather than guaranteed capacity for every beverage size.

Dual Temperature Modes

⚠️ Temperature Range Is Supplier-Rated

Actual internal temperature and cool-down / warm-up time can vary with ambient temperature, initial item temperature, loading level, ventilation, vehicle power availability and how frequently the lid is opened.

⚠️ Not a Certified Medical or Precision Storage Refrigerator

The product page does not publish medical-storage certification, pharmaceutical-storage certification or independent temperature-uniformity testing. Do not rely on this refrigerator for medicines, vaccines or other items requiring certified temperature control. For perishable food, follow applicable food-storage temperature guidance.

Metal Interior Construction

Stainless-Steel Exterior Panel

The supplier describes the exposed panel as stainless steel and designed to resist visible fingerprints and smudges while coordinating with the surrounding trunk area.

Compressor Cooling Technology

The supplier specifically identifies this as a compressor refrigerator rather than a thermoelectric cooler.

Compressor refrigeration is used to provide active cooling and maintain the selected temperature range under compatible operating conditions.

Low-Noise Operation

The supplier states that operating noise can be as low as approximately 26dB. Actual perceived noise can vary with compressor load, installation, vehicle environment and measurement conditions.

26dB Is a Supplier-Stated Minimum

The current page does not publish the measurement distance, test environment or independent acoustic test report. For that reason, describe 26dB as a supplier-stated low-noise figure rather than a guaranteed operating level.

12V Vehicle Power

The refrigerator is powered from the vehicle's 12V outlet according to the current product page.

The supplier also states that the compressor switches to a lower-frequency energy-saving mode after the target temperature is reached.

⚠️ 24-Hour Energy Figure Is Not Clearly Published

The supplier states that 24-hour consumption is “less than 0.5 KW,” but the published unit is not sufficient to establish a precise 24-hour energy-consumption figure. Do not advertise a specific kWh-per-day value unless the manufacturer confirms the correct measurement and test conditions.

Three Ways to Control Temperature

⚠️ Not Native Tesla Factory Screen Integration

The supplier describes touch control through an included expansion dock. Do not describe this as native Tesla firmware integration or a factory Tesla refrigerator control unless separate documentation confirms that functionality.

Vehicle Compatibility

⚠️ Model 3 Highland 2024+ Only

The supplier explicitly states that this 10L refrigerator is designed specifically for the Tesla Model 3 Highland 2024+ and will not fit properly in other Tesla models or earlier Model 3 versions. Do not assume compatibility with Model Y Juniper, Model YL or pre-Highland Model 3.

Installation Overview

1. Confirm Vehicle Compatibility
Verify that the vehicle is a Tesla Model 3 Highland 2024+ and compare the rear-trunk layout before installation.

2. Clear the Rear-Trunk Area
Remove loose cargo and make sure the installation compartment is clean and dry.

3. Position the Refrigerator
Place the unit into the intended rear-trunk location according to the supplied installation instructions.

4. Connect the Power Supply
Connect the refrigerator to the compatible 12V vehicle outlet using the supplied power connection.

5. Install the Expansion Dock
If using the supplied touch-control interface, install and connect the expansion dock according to the provided instructions.

6. Test Before Loading
Power on the refrigerator, select a moderate temperature and confirm normal compressor operation before loading food or drinks.

Installation Video Available from the Supplier

The current product page directs customers to contact the supplier for installation-video support. Follow the installation procedure supplied with the exact refrigerator version rather than improvising electrical connections.

⚠️ Do Not Block Compressor Ventilation

Compressor refrigerators generate heat while operating. Keep the refrigerator's ventilation openings clear and do not pack soft luggage, blankets or other objects tightly against required airflow areas.

⚠️ Electrical Use

Use only the intended vehicle power connection and supplied components. Do not modify wiring, bypass fuses or connect the refrigerator to an incompatible voltage source. Disconnect power before servicing, moving or inspecting electrical connections.

⚠️ Heating Mode Is for Warming, Not Cooking

The supplier-rated heating range is 30°C to 50°C. Do not use the refrigerator to