LED Door Projector Lights for Tesla Model 3/Y

LED Door Projector Lights for Tesla Model 3 / Model Y

Upgrade your Tesla door lighting with crisp Plaid-style ground projection whenever the door opens. Designed as a direct replacement for the factory door light, these LED projector modules use high-transmittance glass optics and plug into the original connector without drilling or additional wiring.

A More Distinctive Door Welcome Effect

Ground Projection When the Door Opens
The projector uses the factory courtesy-light location to cast a Plaid-style image onto the ground beside the vehicle.

Sharper Projection Optics
The supplier specifies high-transmittance multi-layer glass lenses and laser-etched projection glass for improved image definition.

No Extra Switches
Operation follows the vehicle's normal door-light behavior, so no separate button or manual light control is required.

Plaid-Inspired Projection

The current exact product is specifically sold with a Plaid-style projection graphic rather than a plain white courtesy light. Choose the desired projection color before ordering.

Projection Color Options

Quantity Options

Choose 2PCS or 4PCS Before Ordering

The product is sold in both 2-piece and 4-piece configurations. Package quantity depends on the selected Style option, so do not assume every order includes lights for all four doors.

Vehicle Compatibility

⚠️ Verify the Factory Door-Light Shape Before Ordering

The current supplier selector states Model 3 / Model Y for all years. Because Tesla can change connectors, lamp housings and door trim between production generations, compare your original door courtesy light and connector with the product photos before ordering, especially on refreshed Model 3 Highland or Model Y Juniper vehicles.

Multi-Layer Projection Optics

The supplier specifies a high-transmittance multi-layer glass lens system combined with LED chips and laser-etched projection glass.

This optical structure is intended to create a clear, defined projected graphic while keeping the module compact enough for the factory door-light opening.

Brightness Is Supplier-Described

The supplier describes the projection as bright and sharp, but the current exact product page does not publish lumen output, lux measurements, beam angle or independent brightness test data. Do not add numerical brightness claims unless separately confirmed.

Heat-Resistant Housing Materials

The supplier states that the projector modules use flame-retardant and high-temperature-resistant materials for normal automotive interior / door-light use.

The exact housing polymer, flame rating and tested temperature range are not published on the current product page.

No Certified Flame Rating Is Published

The supplier describes the materials as flame-retardant and heat-resistant but does not publish a UL94 rating or complete-product safety certification. Do not add a specific flame-resistance grade unless separately documented.

Automatic On / Off

Once connected to the compatible factory door-light circuit, the projector follows normal door operation: it illuminates when the door opens and turns off when the door closes.

Decorative Welcome Lighting

These projector lights are primarily decorative courtesy / welcome lights. They should not be treated as certified pedestrian-warning lights, hazard lights or a replacement for the vehicle's required exterior safety lighting.

Plug-and-Play Installation

1. Open the Door
Locate the original courtesy / puddle light in the lower door panel.

2. Release the Factory Light
Use a suitable plastic trim tool to gently release the original lamp from the door panel.

3. Disconnect the Original Plug
Carefully unplug the factory electrical connector from the original light.

4. Connect the Projector Light
Plug the original vehicle connector into the new LED projector module.

5. Test Before Final Installation
Confirm that the projector illuminates correctly before snapping the module fully into the opening.

6. Snap Into Place
Align the module with the original lamp opening and press it into position until securely seated.

No Drilling or Additional Wiring

The supplier describes this as a direct replacement for the factory door light. No drilling, wire splicing or separate power cable is required on compatible configurations.

⚠️ Do Not Pull on the Factory Wiring

When removing the original door light, support the connector and wiring carefully. Do not pull on the wire itself or force the plug into the replacement module. If the connector does not match, stop installation and verify compatibility.

Check Projection Orientation Before Final Seating

Before snapping the lamp fully into the door panel, confirm that the projected image is oriented correctly. If the module is installed in the wrong orientation, the projected graphic may appear rotated or reversed relative to the vehicle.

⚠️ No IP Waterproof Rating Is Published

The current exact product page does not provide an IP water-resistance rating. Avoid pressure-washing directly into the door-light opening or treating the projector module as waterproof or submersible.

Cleaning & Care

Clean the Lens Gently
Use a soft microfiber cloth to remove dust from the projector lens.

Avoid Abrasives
Do not use abrasive pads or sharp tools on the optical surface.

Inspect Periodically
If the projection becomes noticeably dim or distorted, inspect the lens for dirt and confirm that the module remains securely seated in the door panel.

Specifications

⚠️ Unpublished Specifications

The current exact product page does not publish operating voltage, wattage, lumen output, color temperature, IP rating, housing material, connector pin specification, beam angle or independent LED lifespan test data. Do not add these specifications unless separately confirmed for this exact product.

Package Configuration

2PCS Option:
2 × LED Door Projector Lights

4PCS Option:
4 × LED Door Projector Lights

Quick Answers