StickerFab

License Plate Light Shrouds (Pair) - 2024+ Grenadier / Quartermaster

$39.99 USD

Sale Sold out

Cuts reverse camera glare — reduces the spread of the license plate light so it doesn't reach the Grenadier's backup camera from either side.
Reuses your factory screws — no new hardware, so the fit is exact every time.
Small wrench included — everything you need is in the bag. It's a parking-lot mod.
Left and right pair — one shroud for each side of the plate.
Clearer picture at night — especially when the camera lens isn't perfectly clean.
No drilling, cutting, or wiring — fully reversible.
Built for the 2024+ INEOS Grenadier / Quartermaster

License Plate Light Shrouds — 2024+ Grenadier / Quartermaster

Banish the reversing camera glare. A left and right pair that installs in minutes with your own factory screws.

StickerFab license plate light shrouds installed on both sides of the rear license plate on an INEOS Grenadier

Fix the Backup Camera Flare

The Grenadier's license plate lights shine out wide, and some of that light reaches the reverse camera and flares across the image — especially at night, and worse when the lens isn't perfectly clean.

StickerFab's License Plate Light Shrouds fit over the plate lamp lenses and narrow the spread of the light, so it stays on your plate and out of your camera. The result is a cleaner, easier-to-read reverse view.

Before and after comparison of INEOS Grenadier reverse camera glare from the license plate lights

See It and Install It in One Watch

A full overview of the shrouds with a walk-through of the install. It's a quick parking-lot mod — no special tools beyond the small wrench in the bag.

Remove the two factory screws holding each license plate lamp lens.
Set the shroud over the lens.
Re-install the same factory screws, then snug them with the included wrench. Repeat on the other side.

Left and right shrouds are a matched pair.

Close-up of a StickerFab license plate light shroud on an INEOS Grenadier rear bumper below the reverse camera

Your Factory Screws, a Perfect Fit

Instead of making you track down replacement hardware, the shrouds are designed to go on with the factory screws you already have. Take the originals out, set the shroud on the lens, and put the same screws back — that's how you get an exact, clean fit.

A small wrench is included, so you can do the whole job in a parking lot.

🔧 Install — A Parking-Lot Mod

Remove the two factory screws on each license plate lamp, set the shroud over the lens, and re-install the same screws with the included wrench. Each side takes a minute or two. No drilling, no cutting, no wiring — and it's fully reversible if you ever want to go back to stock.

Left and right StickerFab license plate lamp shrouds flanking the plate on an INEOS Grenadier

Rear view of an INEOS Grenadier with license plate light shrouds installed

💡 Left and Right Pair

You get both shrouds, one for each side of the plate, so the glare is handled from either direction.

Specifications

Fits	2024+ INEOS Grenadier and Quartermaster
Includes	Left and right shroud (pair) and a small wrench
Hardware	Uses your factory license plate lamp screws
Install	Bolt-on, no drilling, cutting, or wiring. Reversible.
Returns	30-day returns

Complete the Build

StickerFab Perfect Plugs for the INEOS Grenadier wiper cowl

Perfect Plugs (Pair) for Windshield Wiper Cowl
Stop the wiper cowl plugs from falling out.

Third brake light overlay for the INEOS Grenadier

Third Brake Light Overlay - 2024+ Grenadier
Give the rear a cleaner, sharper look.

Front bumper step pad overlay inserts for the INEOS Grenadier

Front Bumper Step Pad Overlay Inserts (Pair)
Protect and refresh the front step pads.

FAQ

What does it fix? Glare and flare on the Grenadier's reverse camera image caused by the license plate lights shining into the lens.	Will my plate still be lit? Yes. The shrouds narrow the spread of the light, so your plate stays illuminated.
Do I need new screws? No. The shrouds reuse your factory screws.	Do I need tools? A small wrench is included in the kit.
How many do I get? A left and right pair, one for each side of the plate.	Does it fit the Quartermaster? Yes, it fits the 2024+ Grenadier and Quartermaster.
Is it permanent? No. It is bolt-on and reversible — reinstall the screws without the shrouds to go back to stock.	Do I need to drill or cut anything? No drilling, cutting, or wiring.