Magsafe Phone Mount for Model 3 / Model Y

MagSafe Wireless Charging Phone Mount for Tesla Model 3 / Model Y / Model YL

Keep your phone securely positioned and conveniently charged with a Tesla-specific magnetic phone mount featuring up to 15W wireless charging, 360° angle adjustment, hidden wiring and an integrated LED ring light. Multiple holder and power-source options are available for different Model 3 and Model Y generations.

Mount, Charge & Adjust From One Location

Magnetic Mounting
Compatible MagSafe-equipped phones can attach directly to the magnetic charging face.

Wireless Charging
The integrated charging surface provides up to 15W peak wireless charging on compatible devices.

Flexible Viewing
The 360° adjustable design allows the display to be positioned vertically or horizontally.

Cleaner Cable Management
Power wiring can be routed away from the main visible dashboard area for a more integrated interior appearance.

Up to 15W Peak Wireless Charging

The supplier specifies a maximum wireless charging output of 15W. Actual charging speed depends on the phone model, battery temperature, phone software, case thickness, magnetic alignment and the available input power.

⚠️ 15W Is a Peak Supplier Rating

Not every phone will charge continuously at 15W. The phone and charger automatically negotiate available wireless charging power, and thermal management may reduce charging speed during extended use.

36-Hole Airflow Design

The charging face uses a 36-hole ventilation layout intended to help air circulate around the phone during wireless charging.

The ventilation structure can help reduce heat buildup but should not be described as an active cooling fan unless a specific selected version is separately confirmed to contain one.

MPP Magnetic Power 1.0

The supplier identifies its magnetic arrangement as MPP Magnetic Power 1.0 and describes it as providing strong magnetic adhesion for compatible phones.

Magnetic holding strength can vary depending on the phone model, case thickness, magnetic ring position and road conditions.

Phone Compatibility

2 Magnetic Sheets Included

The current supplier FAQ states that two magnetic sheets are included to help non-MagSafe phones or cases attach to the magnetic mount. Wireless charging compatibility must still be checked separately for the phone and case being used.

⚠️ Thick or Non-MagSafe Cases May Affect Performance

Very thick cases, wallet cases, metal plates or poorly positioned magnetic rings can reduce magnetic holding strength or prevent normal wireless charging. Remove or change the case if mounting or charging performance is inconsistent.

Current Vehicle Compatibility

⚠️ Select the Correct Vehicle Generation

Tesla dashboard and interior layouts differ between earlier vehicles, Model 3 Highland and Model Y Juniper / Model YL. Choose the version that matches your exact vehicle rather than ordering by Model 3 or Model Y name alone.

Current Holder Options

OBD Charger Is Variant-Dependent

The OBD car charger is included only with the variants specifically labeled “+ OBD Car Charger.” Do not describe every version of the mount as including an OBD power adapter.

⚠️ Important: Right-Hand Drive Vehicles

On right-hand drive Model 3 / Model Y vehicles, the supplier states that the OBD port is located on the left side and the included OBD wiring harness is not long enough to reach the mount.

For RHD vehicles, power the charging mount from the center console instead and route the charging cable to the phone holder.

Left-Hand Drive Vehicles

For left-hand drive vehicles, Tesery states that the compatible OBD-equipped version can use the included OBD port connection as intended. Always confirm the correct harness routing for your exact vehicle before installation.

360° Viewing Adjustment

The mount provides full 360° rotational adjustment so the phone can be positioned in portrait or landscape orientation.

Set the phone position before driving and keep the display outside the driver's critical road-view area.

⚠️ Do Not Adjust the Mount While Driving

Position the phone before the vehicle moves. Do not watch entertainment content, manipulate the holder or make detailed phone adjustments while driving. Follow all local laws regarding mounted displays and handheld-device use.

⚠️ Keep the Driver's View Clear

After installation, adjust the mount so the phone does not obstruct the windshield, mirrors, center display, steering-wheel controls or the driver's view of the road. Reposition the holder if any visibility or control interference occurs.

Integrated LED Ring Light

An LED ring around the charging area adds an illuminated visual accent that coordinates with the modern Tesla interior. The current page does not publish separate LED color-selection or brightness specifications.

Installation Overview

1. Confirm Your Vehicle Version
Select the correct Model 3 / Highland / Model Y / Juniper / YL configuration.

2. Confirm the Holder Style
Identify whether your order contains the Flexible or Left Fixed phone-holder version and whether the OBD charger was selected.

3. Position the Mount
Install the holder in the intended dashboard / screen-side position according to the supplied configuration.

4. Route the Power Cable
Use the intended OBD connection on compatible LHD configurations, or route power from the center console where required.

5. Test Wireless Charging
Attach a compatible phone and verify stable magnetic alignment and normal charging.

6. Check Visibility & Controls
Adjust the mount and confirm that the phone does not block the driver's view or interfere with vehicle controls.

Soft Contact Surface

The supplier describes the mounting base as using a soft rubber coating and a thicker silicone contact layer intended to cushion the interior surface, reduce vibration and help prevent slipping.

Removal Marks Can Depend on Installation Conditions

The supplier states that the mounting design is intended for clean removal without marks. Actual results can vary with installation duration, surface condition, cabin temperature and removal technique. Remove the mount carefully rather than pulling it away abruptly.

Specifications

⚠️ Unpublished Specifications

The current exact page does not publish the complete mount material specification, input-voltage range, OBD charger electrical rating, phone-mount weight, exact dimensions, magnetic holding-force value or LED power specification. Do not add these values unless separately confirmed for this exact product.

Package Configuration

Phone Holder:
1 × Selected MagSafe Phone Holder Configuration

Magnetic Accessories:
2 × Magnetic Sheets

OBD Car Charger:
Included only when a “+ OBD Car Charger” option is selected.

Quick Answers