Teskay
Model Y Juniper ABS Body Kit - Rear Diffuser + Lower Bumper Lip
Model Y Juniper ABS Body Kit - Rear Diffuser + Lower Bumper Lip
Couldn't load pickup availability
ABS Rear Diffuser & Lower Bumper Lip for Tesla Model Y Juniper 2025+
Give the refreshed Model Y Juniper a wider, deeper and more performance-focused rear profile with a modular ABS body kit combining a sculpted center diffuser with optional lower bumper side wings.
Aggressive Rear Styling
Sculpted fins, extended lower edges and a wider visual footprint give the Juniper rear bumper a stronger performance-inspired stance.
Modular 3-Piece Design
The full kit combines one center rear diffuser with two independent lower bumper side wings, allowing customers to purchase the complete system or selected sections only.
No-Drill Adhesive Mounting
Automotive-grade double-sided adhesive secures the components to the prepared bumper surface without drilling, cutting or permanent bumper modification.
Why This Juniper Rear Body Kit Stands Out
Each section is shaped around the refreshed Model Y Juniper rear bumper rather than adapted from a universal diffuser or pre-refresh Model Y component.
Choose the complete 3-piece setup, the two lower side wings only, or the center rear diffuser only depending on the look you want to create.
High-strength ABS provides a practical balance of rigidity, impact resistance and controlled flexibility for lower exterior body styling.
Vertical fins and extended lower surfaces are designed to visually organize the rear underbody area and help guide airflow leaving the lower rear bumper.
Because the current version installs with automotive adhesive rather than drilled fasteners, the kit can be removed later using proper adhesive-removal techniques.
Three Purchase Configurations
3 Pcs: 1 center rear diffuser + 2 lower bumper side wings.
2 Pcs: left + right lower bumper side wings only.
1 Pc: center rear diffuser only.
Build the Rear Profile You Want
Glossy Carbon Fiber Texture and Matte Carbon Fiber Texture are visual finishes applied to ABS components. The structural material remains ABS.
The diffuser-style fins and lower lip surfaces are designed with rear airflow management in mind. No independent drag-coefficient, downforce, wind-tunnel or range-improvement figures are currently published, so no quantified aerodynamic improvement is claimed here.
No-Drill Adhesive Installation
Hold the diffuser and/or side wings against their intended positions before applying adhesive and confirm the bumper contours and left/right alignment.
Remove dirt, oil, wax, silicone dressing, moisture and detailing residue from all bonding locations and allow the area to dry completely.
Use the supplied adhesion promoter wipes on the designated bumper contact areas according to the installation instructions.
Apply the supplied automotive tape to the diffuser and bumper-lip contact surfaces where required, keeping the tape flat and continuous.
Carefully align the center diffuser and side wings before allowing the full adhesive surface to contact the bumper.
Apply firm, even pressure across every bonded section and confirm that all outer edges sit flush before using the vehicle normally.
The current manufacturer installation uses automotive-grade double-sided adhesive for all three components. Drilling, cutting and permanent bumper modification are not required.
Wax, ceramic-coating residue, silicone dressing, dust, oil, low temperatures and moisture can reduce adhesive strength. Test-fit first and prepare all bonding areas thoroughly before installation.
Current manufacturer guidance lists approximately 15–25 minutes for installation, with no special tools required.
Specifications
| Attribute | Details |
|---|---|
| Product | ABS Rear Diffuser + Lower Bumper Lip Body Kit |
| Compatibility | Tesla Model Y Juniper 2025+ |
| Legacy Model Y | Not Compatible |
| Material | High-Strength ABS Plastic |
| 3-Piece Option | 1 × Rear Diffuser + 2 × Lower Bumper Lip Side Wings |
| 2-Piece Option | 2 × Lower Bumper Lip Side Wings |
| 1-Piece Option | 1 × Center Rear Diffuser |
| Finish Options | Glossy Black / Matte Black / Glossy Carbon Fiber Texture / Matte Carbon Fiber Texture |
| Genuine Carbon Fiber | No — Carbon Options Are Textured ABS Finishes |
| Installation Location | Lower Rear Bumper |
| Installation Method | Automotive-Grade Double-Sided Adhesive |
| Adhesion Promoter | Included |
| Drilling | Not Required |
| Cutting | Not Required |
| Special Installation Tools | Not Required |
| Manufacturer Installation Time | Approx. 15–25 Minutes |
| Verified Weight / Dimensions | Not Published on Current Product Page |
| Verified Ground-Clearance Change | No Specific Measurement Published |
| Full 3-Piece Package | 1 × Rear Diffuser + 2 × Lower Bumper Lips + 3 × Adhesion Promoter Wipes + 2 × Rolls of Automotive Double-Sided Tape |
Quick Answers
Which variant is selected in the source link? +
The supplied source URL currently selects the complete 3-piece Rear Diffuser + Lower Bumper Lip kit in Glossy Black.
Which Tesla does this body kit fit? +
It is designed specifically for Tesla Model Y Juniper 2025+.
Will it fit a pre-Juniper Model Y? +
No. The current manufacturer listing identifies this as a Juniper-specific rear bumper kit.
What comes with the 3-piece version? +
One center rear diffuser and two lower bumper lip side wings, plus the current listed adhesion promoter wipes and automotive double-sided tape.
Can I buy only the center diffuser? +
Yes. Select the 1 Pc Rear Diffuser configuration.
Can I buy only the two side wings? +
Yes. Select the 2 Pcs Lower Bumper Lip configuration for the left and right outer sections without the center diffuser.
What material is the kit made from? +
The current specification lists high-strength ABS plastic.
Are the carbon fiber texture versions real carbon fiber? +
No. The carbon fiber texture options are visual finishes on ABS components, not genuine carbon-fiber parts.
Does installation require drilling? +
No. The current manufacturer instructions specify automotive-grade double-sided adhesive installation without drilling.
Does installation require cutting the bumper? +
No. The current installation does not require cutting or permanently modifying the original bumper.
How long does installation take? +
Current manufacturer guidance lists approximately 15–25 minutes under suitable installation conditions.
Will it reduce ground clearance? +
The current product page does not publish a verified ground-clearance reduction measurement. Because the kit extends below the original bumper profile, use additional care around steep ramps, curbs and uneven surfaces.
Does the diffuser improve aerodynamic performance? +
Its shape is designed around rear airflow management, but no independent drag, downforce, wind-tunnel or range-improvement figures are currently published for this product.
Can the kit be removed later? +
Yes. Since the current version does not require drilling, the parts can be removed with careful adhesive-softening and paint-safe residue-removal techniques.
SKU: TSP005-3GB
