Teskay
Portable Tripod Mount for Starlink Gen 3
Portable Tripod Mount for Starlink Gen 3
Couldn't load pickup availability
Portable Adjustable Tripod Mount for Starlink
Create a fast, elevated Starlink setup at campsites, RV stops, temporary work areas and other outdoor locations with a foldable steel tripod that adjusts from approximately 60 cm to 135–137 cm in height and packs into its included carry bag when the connection needs to move with you.
Portable Starlink Elevation
Raise a compatible Starlink terminal above low vegetation, campsite equipment and other nearby ground-level obstacles without installing a permanent pole.
Adjustable Height
Extend the telescoping center column from approximately 60 cm to around 135–137 cm and secure the selected position using the integrated locking knobs.
Fold, Pack & Move
The three tripod legs collapse alongside the center pole, creating an approximately 60 cm-long package that fits into the included carry bag.
Why This Portable Starlink Tripod Stands Out
Three folding legs spread away from the center mast to create a broad freestanding footprint for temporary ground-level installations.
Current product specifications and imagery identify a steel / alloy-steel tripod structure with a glossy black exterior finish.
Rubber feet at the end of all three legs help improve grip on hard ground, decks and other relatively flat surfaces.
Large hand-operated locking knobs allow the center mast and tripod elevation to be secured without repeatedly reaching for installation tools.
A practical option for camping, RV stops, temporary outdoor work areas and other locations where drilling or permanent roof mounting is undesirable.
Portable Mount — Not a Permanent Wind-Rated Installation
No verified wind-speed or permanent-installation rating is currently published for this tripod. Use it on a stable, level surface and take additional precautions in wind. It should not be treated as an unattended permanent roof mount or an in-motion vehicle mount.
Foldable Steel Structure with Telescoping Height
Older source copy states a 500 g support rating, but that figure conflicts with the weight of the Starlink terminals the same listing claims to support. It should therefore not be treated as a verified safe working load.
Fast Setup for Campsites, RVs & Temporary Locations
Open all three legs completely until the triangular support braces are evenly deployed.
Select a firm, level surface and verify that each rubber foot has full contact before installing the terminal.
Attach the appropriate dish-to-pole interface for your specific Starlink hardware before placing the terminal on the mast.
Raise the center pole only as high as needed to clear nearby ground-level obstructions.
Hand-tighten the mast and elevation locking knobs before connecting cables or leaving the tripod unattended.
Confirm stable footing and use the Starlink App's alignment / obstruction tools as appropriate for your terminal.
Current package imagery shows a tripod, carry bag and a pipe-adapter-style component. However, the product copy separately warns that a dedicated “Starlink pipe adapter” is not included. Because Starlink generations use different mounting interfaces, confirm the exact adapter required for your terminal before installation.
This tripod is designed as a freestanding temporary setup. Do not use it unsecured on a moving RV, vehicle, boat or other platform while in motion.
Specifications
| Attribute | Details |
|---|---|
| Product | Portable Adjustable Tripod Mount for Starlink |
| Manufacturer-Listed Compatibility | Starlink Gen 3 / Standard Actuated / High Performance |
| Additional Antenna Use | Manufacturer Also Markets Stand for Compatible Pole-Mounted Antennas |
| Main Material | Steel / Alloy Steel |
| Finish | Glossy Black |
| Minimum / Folded Height | Approx. 23.5 in / 60 cm |
| Maximum Height | Approx. 53.15 in / 135 cm in Current Text; Product Image Shows Approx. 137 cm |
| Height Adjustment | Telescoping Center Pole with Locking Knob |
| Leg Structure | Three-Leg Folding Triangle Support |
| Feet | Anti-Slip Rubber Feet |
| Folding Design | Yes |
| Carry Bag | Included |
| Verified Safe Working Load | Not Reliably Published |
| Wind-Speed Rating | Not Published |
| Ground Anchors / Stakes | Not Listed in Current Package |
| In-Motion Use | Not Intended as an In-Motion Mount |
| Permanent Roof Installation | No — Portable Freestanding Design |
| Tripod Stand | 1 × Included |
| Carry Bag | 1 × Included |
| Pipe Adapter / Bracket | 1 × Component Shown and Listed in Package Imagery |
| Dedicated Starlink Dish Adapter | Current Copy Separately States “Starlink Pipe Adapter Is NOT Included” — Confirm Required Adapter Before Ordering |
Quick Answers
Which Starlink models are currently listed as compatible? +
The current manufacturer listing names Starlink Gen 3, Standard Actuated and High Performance. The exact dish-to-pole adapter still needs to match your specific terminal.
Is Starlink Mini listed as compatible? +
Starlink Mini is not specifically listed in the current compatibility description for this tripod. A Mini-specific adapter should not be assumed to fit without verification.
How tall is the tripod? +
It adjusts from approximately 60 cm to roughly 135–137 cm, depending on which current source measurement is referenced.
How long is it when folded? +
The current manufacturer specification lists approximately 23.5 inches / 60 cm when folded.
What is the tripod made from? +
Current manufacturer text describes a steel triangular structure, while product imagery identifies alloy steel.
Is a carry bag included? +
Yes. Current package imagery and the packing list both show one carry bag with the folding tripod.
Is the Starlink pipe adapter included? +
The current package image shows and labels a “Pipe Adapter,” but the product text separately warns that the “Starlink pipe adapter is NOT included.” Because those statements conflict, confirm the dedicated adapter required by your specific Starlink terminal before ordering.
What is the maximum load capacity? +
No reliable safe-working-load figure is currently available. Older copy lists 500 g, but that figure is inconsistent with the weight of the Starlink terminals the product is marketed to support, so it should not be used as an engineering rating.
Does it have anti-slip feet? +
Yes. Rubberized anti-slip feet are fitted to all three legs.
Can I use it beside an RV? +
Yes, as a stationary freestanding setup on suitable ground. It can be useful when you want to position Starlink away from an RV roof or nearby trees.
Can it be used on a boat or yacht? +
The manufacturer markets it for yacht and outdoor use, but a freestanding tripod should only be used on a stable stationary surface. It is not an in-motion marine mount.
Can I leave it outside permanently? +
It is designed primarily as a portable temporary stand. No permanent outdoor-installation rating, corrosion-life specification or wind-speed certification is currently published.
Can I use it in strong wind? +
No verified wind-speed rating is published. Wind loads on a Starlink terminal can create significant leverage on a tall tripod, so lower the mast, add appropriate stabilization or pack the system away when conditions become unsafe.
Are ground stakes included? +
Ground stakes or guy-line anchors are not shown in the current package list, so they should not be assumed included.
SKU: SRM001
