Teskay
Real Dry Carbon Fiber Steering Wheel Trim Covers for Model Y Juniper & Model 3 Highland
Real Dry Carbon Fiber Steering Wheel Trim Covers for Model Y Juniper & Model 3 Highland
Couldn't load pickup availability
Real Dry Carbon Fiber Steering Wheel Rim Trim Covers for Model 3 Highland & Model Y Juniper
Give the most visible part of your Tesla interior a genuine motorsport-inspired upgrade with precision-molded real dry carbon fiber overlays designed for the upper and lower steering wheel rim sections.
Genuine Dry Carbon Fiber
Made from real dry carbon fiber rather than printed ABS or a vinyl carbon-look film, creating authentic fiber depth and a lightweight rigid shell.
Vehicle-Specific Molded Fit
The curved overlays follow the refreshed steering wheel rim profile used by Model 3 Highland and Model Y Juniper for a clean, integrated appearance.
Non-Destructive Overlay Installation
Pre-applied adhesive allows the carbon shells to install over the original steering wheel trim without drilling, wiring or replacing the complete steering wheel.
Why These Steering Wheel Trim Covers Stand Out
Standard Glossy and Matte versions display the familiar woven carbon-fiber pattern instead of a printed imitation.
Glossy Forged and Matte Forged options provide a more irregular chopped-fiber visual appearance for owners who prefer a less traditional carbon look.
The rigid shell creates a physical layer over the covered rim sections, helping reduce direct contact with the original surface underneath.
Current manufacturer specifications describe the carbon finish as UV-protected and resistant to normal daily wear.
Get a genuine carbon-fiber appearance while retaining the original steering wheel, buttons, scroll controls and center airbag assembly.
Rim Covers — Not the Center Bezel or Airbag Cover
This listing is for the curved carbon trim that overlays the steering wheel rim sections. Steering-wheel button bezels, center airbag trim and V-shaped spoke covers are separate accessories unless specifically stated otherwise in the selected package.
Four Real Carbon Fiber Finish Options
Peel, Align & Press — No Steering Wheel Removal
Compare your original steering wheel with the product images before installation, especially around the upper and lower rim transitions.
Remove dust, skin oils, detailing products and residue from every area that will contact the adhesive.
Place each carbon shell over the intended rim section without removing the adhesive liner and confirm the edges sit evenly.
Peel the protective backing only after the correct orientation and alignment have been confirmed.
Position the cover evenly over the original steering wheel surface without forcing or bending the carbon shell.
Apply firm, even pressure along all adhesive areas to establish secure contact before normal use.
These rim overlays are positioned away from the center airbag module and steering-wheel button areas when the correct vehicle-specific covers are installed.
The manufacturer does not publish a heated-steering-wheel performance test for these rigid carbon overlays. Because they cover portions of the original rim surface, some change in perceived heat transfer through the covered sections is possible.
Specifications
| Attribute | Details |
|---|---|
| Product | Real Dry Carbon Fiber Steering Wheel Rim Trim Covers |
| Confirmed TESKAY Fitment — Model 3 | Model 3 Highland 2024+ |
| Confirmed TESKAY Fitment — Model Y | New Model Y / Model Y Juniper 2025+ |
| Legacy Model 3 | Not Listed |
| Legacy Model Y | Not Listed on Current TESKAY Selector |
| Model Y Standard / Model YL | Mentioned in Latest Tesery Selector; Not Yet Confirmed on Current TESKAY Selector |
| Material | Genuine Real Dry Carbon Fiber |
| Standard Finish Options | Glossy / Matte |
| Forged-Style Options | Glossy Forged / Matte Forged |
| Installation Area | Upper / Lower Steering Wheel Rim Sections |
| Installation Type | Adhesive Overlay |
| Adhesive | Pre-Applied Peel-and-Stick Adhesive Backing |
| Drilling | Not Required |
| Wiring | Not Required |
| Steering Wheel Removal | Not Required |
| Airbag Coverage | Does Not Cover Center Airbag Module |
| Steering-Wheel Button Coverage | Does Not Cover Buttons / Scroll Controls When Properly Installed |
| Heated Steering Wheel Test | Not Published |
| UV Protection | Manufacturer-Listed UV-Protected Finish |
| Scratch / Wear Resistance | Manufacturer Describes Resistance to Normal Daily Wear |
| Published Weight | Not Published |
| Published Dimensions | Not Published |
| Package | Vehicle-Specific Steering Wheel Rim Carbon Trim Cover Set in Selected Finish |
Quick Answers
Is this genuine carbon fiber or carbon-look ABS? +
It is listed as genuine real dry carbon fiber. It is not marketed as printed ABS or a carbon-pattern vinyl sticker.
Which finish options are available? +
Current options are Glossy, Matte, Glossy Forged and Matte Forged.
Does it fit Model 3 Highland? +
Yes. The current TESKAY selector lists Model 3 Highland 2024+.
Does it fit Model Y Juniper? +
Yes. Select the New Model Y 2025+ configuration.
Does it fit an older Model 3 or Model Y? +
The current TESKAY selector only confirms Model 3 Highland 2024+ and New Model Y 2025+. Do not assume older steering wheel shapes are compatible.
What about Model Y Standard or Model YL? +
Tesery's latest selector mentions Model Y Standard and Model YL, but the current TESKAY selector has not yet added those dedicated options. Confirm the steering wheel shape before ordering for either vehicle.
Does this include the carbon trim around the steering wheel buttons? +
This listing is for the steering-wheel rim trim covers. Button-bezel carbon overlays are separate accessories unless specifically included by the selected package.
Does it cover the center airbag? +
No. The rim covers install away from the center airbag assembly when correctly fitted.
Will it block the steering wheel buttons or scroll wheels? +
No. The covers are shaped for the wheel rim rather than the button and scroll-control areas.
Will it affect the heated steering wheel? +
No verified heating-performance test is currently published. Because the carbon shell sits over portions of the heated rim, heat may feel different or transfer more slowly through the covered sections.
Do I need to remove the steering wheel? +
No. This is an adhesive overlay installation and the original steering wheel remains in the vehicle.
Does installation require drilling or wiring? +
No. The current installation method is peel, align and press. No drilling, wire cutting or electrical connection is required.
Can the covers be removed later? +
They are adhesive-mounted and can generally be removed carefully. Use trim-safe heat and adhesive-removal methods rather than pulling the rigid carbon shell off aggressively.
Are exact dimensions and weight published? +
No verified overall dimensions or product weight are currently published, so this description does not invent those values.
SKU: sku-67827033538775
