Teskay
Rear Diffused Guide Light for Model Y Juniper丨High-Visibility Brake & Driving Pilot Light
Rear Diffused Guide Light for Model Y Juniper丨High-Visibility Brake & Driving Pilot Light
Couldn't load pickup availability
Rear Diffused Guide Light for Tesla Model Y Juniper 2025+
Add a distinctive center-mounted rear light signature to your Model Y Juniper with smooth diffused illumination that stays visible while driving and becomes more prominent during braking.
Dual-Stage Lighting
Maintains a lower-intensity red glow during normal driving, then increases visual intensity when the brake signal is activated.
Smooth Diffused Light Guide
High-density light-guide optics create a continuous neon-like glow rather than the visible individual LED points common in basic auxiliary lights.
Plug & Play Harness
Vehicle-specific connectors integrate the light into the compatible Juniper wiring system without cutting or splicing the original harness.
Why This Rear Pilot Light Stands Out
The light housing and electrical harness are built around the refreshed Model Y Juniper rear structure rather than using a generic universal rear lamp.
The low central position creates an F1-style rear light appearance that visually complements the Juniper's continuous factory tail-light bar.
Brake-signal synchronization makes the center light noticeably brighter than its normal driving state, adding another visible rear braking cue.
The sealed light assembly is rated IP68 for resistance to rain, road spray and normal exterior driving conditions.
An integrated control module is designed to interpret the compatible vehicle lighting signal and operate the driving and brake modes without an external switch.
Designed to Work Automatically
There is no separate dashboard button required for normal use. Once correctly installed, the pilot light follows the compatible vehicle's driving and braking signals through the supplied harness.
Smooth Illumination with Two Distinct Modes
A light-guide structure spreads LED output across the lens, producing a more continuous illuminated surface rather than a row of clearly separated point LEDs.
Juniper-Specific Plug & Play Installation
Carefully access the designated central rear lower trim mounting area according to the installation instructions.
Align the pilot-light housing with its designated rear mounting position and secure it into the compatible trim structure.
Bridge the supplied vehicle-specific connectors into the designated factory lighting harness without cutting or splicing original wiring.
Before fully reassembling the rear trim, verify that the light operates correctly in its normal driving state and responds properly to the brake signal.
The current electrical design uses matching plug-in connectors. Installation still requires access to the rear trim and routing the supplied harness securely away from moving or hot components.
This pilot light is an additional visual lighting element and should not replace, disable or obstruct any original tail light, brake light, reflector or license-plate lighting. Exterior-lighting regulations can vary by location.
Specifications
| Attribute | Details |
|---|---|
| Product | Rear Diffused Guide / Pilot Light |
| Vehicle Compatibility | Tesla Model Y Juniper 2025+ |
| Not Compatible | Pre-Juniper Model Y 2020–2024 |
| Installation Location | Center Rear Lower Bumper / Rear Trim Area |
| Housing Material | ABS + PC |
| Light Type | Diffused Red LED Light Guide |
| Operating Voltage | 12V |
| Driving Mode Power | 4.0W |
| Brake Mode Power | 5.6W |
| Driving Function | Lower-Intensity Continuous Red Illumination |
| Brake Function | Higher-Intensity Brake Warning / Flashing Behavior |
| Waterproof Rating | IP68 |
| Signal Control | Integrated Decoding / Vehicle-Synchronized Control Module |
| Electrical Connection | Vehicle-Specific Plug & Play Harness |
| Wire Cutting / Splicing | Not Required |
| Main Package | 1 × Rear Diffused Light Assembly + Vehicle-Specific Wiring / Installation Accessories |
Quick Answers
Which Tesla does this light fit? +
It is specifically designed for Tesla Model Y Juniper 2025+.
Will it fit a 2020–2024 Model Y? +
No. The mounting structure and wiring are different. This version is specifically designed for the refreshed Model Y Juniper.
Where is the light installed? +
It installs in the center of the lower rear bumper / rear trim area, below the license-plate region.
Is it always illuminated while driving? +
The current product specification includes a Driving Mode that operates at a lower intensity, with a separate brighter Brake Mode.
What happens when I press the brake pedal? +
The light switches from its lower-power driving state to the higher-output brake warning state. The current manufacturer description specifies a stronger flashing warning behavior during braking.
Does it work as a reverse light? +
The current technical specification confirms Driving Mode and Brake Mode. A dedicated reverse-light function is not confirmed for the current version, so it should not be treated as a replacement for the factory reverse lights.
Does installation require cutting wires? +
No. The current product uses a vehicle-specific plug-and-play harness that bridges into the designated factory connector.
Will it cause a dashboard error? +
The manufacturer states that the integrated decoding module is designed to communicate with the compatible vehicle system without triggering normal lighting error messages. Correct vehicle fitment and installation are still essential.
Is the light waterproof? +
Yes. The current technical specification lists an IP68 waterproof rating for the light assembly.
How much power does it use? +
The manufacturer lists 12V / 4.0W in Driving Mode and 12V / 5.6W in Brake Mode.
Does it replace the original Tesla brake lights? +
No. It is an additional center-mounted lighting element. The original Tesla tail and brake lights remain the vehicle's primary factory lighting system.
What is included in the kit? +
The current product imagery shows the rear light assembly, vehicle-specific wiring harness, routing accessories, cable ties, mounting tape and a trim tool. Exact accessory contents can vary slightly by production batch.
SKU: TTL005
