Teskay
Seat Ventilation Seat Covers for Model 3 Highland & Model Y Juniper
Seat Ventilation Seat Covers for Model 3 Highland & Model Y Juniper
Couldn't load pickup availability
Seat Ventilation Covers for Tesla Model 3 & Model Y
Add active airflow to your Tesla seat without replacing the factory upholstery. Ten integrated high-speed fans, a turbine-boosted airflow system and three selectable fan speeds help move trapped heat and moisture away from your back and legs during hot-weather driving.
10 High-Speed Fans
Multiple compact fans distribute active airflow across both the seat base and backrest to help reduce trapped heat where your body contacts the seat.
Brushless Turbine Airflow
A turbine-style blower with a brushless motor supports stronger airflow while the current manufacturer specification keeps operating noise below approximately 40dB.
Three Airflow Levels
A built-in control button lets you cycle through three ventilation levels so airflow can be adjusted for different weather and comfort preferences.
Why This Ventilated Seat Cover Stands Out
The cover contains powered fans that actively move air through the seat rather than relying only on passive mesh.
Internal guide channels distribute fan output across the contact area instead of concentrating airflow around a single fan location.
Current manufacturer specifications list fan-system noise below 40dB under normal operation.
The cushion follows the main Tesla front-seat shape, covering both the seat base and backrest while preserving access around the headrest and seat perimeter.
The cover is secured with buckles and hooks and powered through the vehicle accessory outlet rather than being permanently built into the factory seat.
1PC or 2PC
1 PC:
One complete ventilated seat cushion for one front seat.
2 PC:
Two complete ventilated seat cushions for both front seats,
with a dual-output power connection shown in current product imagery.
Ten Fans with Guided Airflow
Quick Strap-On Installation
Center the ventilated cushion on the front seat with the airflow surfaces aligned to the seat base and backrest.
Insert the supplied center retention buckle into the gap between the seat base and backrest.
Attach the upper retention point around the headrest area so the backrest section stays aligned.
Secure the lower hooks beneath the seat without routing straps around seat rails, electrical connectors or moving mechanisms.
Plug the supplied fused adapter into a compatible vehicle 12V accessory socket.
Hold the control button for approximately two seconds to start the system, then tap to cycle through the three settings.
The current manufacturer specifically warns that this product is not suitable when the intended vehicle accessory outlet is rated for continuous current of no more than 12A (peak 16A). Check the rating of the exact socket you intend to use before connecting the seat cover.
The current product source does not publish independent certification for seat-integrated safety systems or occupant sensors. During installation, do not route straps or cables through moving seat hardware or factory electrical connectors, and stop using the cover if any seat-related warning appears.
Specifications
| Attribute | Details |
|---|---|
| Product | Active Ventilation Seat Cover |
| Current Default Source Selection | Model Y Juniper 2025+ / White / 1 PC |
| Model 3 | 2017–2023 |
| Model 3 Highland | 2024+ |
| Model Y | 2020–2024 |
| Model Y Juniper | 2025+ |
| Color Options | White / Black |
| Quantity | 1 PC / 2 PC |
| Fan Count | 10 High-Speed Fans |
| Main Fan Motor | Brushless / Turbine-Style |
| Noise | Manufacturer-Listed <40dB |
| Airflow Levels | 3 |
| Red Indicator | Strong Wind |
| Green Indicator | Strong Cool Wind |
| Blue Indicator | Soft Wind |
| Power-On Operation | Press & Hold Approx. 2 Seconds |
| Automatic Shutoff | No — Current Product Image States Manual Power-Off |
| Power Source | Vehicle 12V Accessory / Cigarette-Lighter Socket |
| Power Adapter Protection | Replaceable Fuse Shown in Current Product Hardware |
| Exact Rated Wattage | Not Published |
| Exact Current Draw | Not Published |
| Low-Power Outlet Warning | Do Not Use with Manufacturer-Identified ≤12A Continuous / 16A Peak Low-Power Outlet Configuration |
| Visible Materials | Breathable Mesh Fabric / Premium PU Leather / Anti-Slip Base |
| Installation | Center Buckle + Headrest Retention + Lower Hooks |
| Wire Cutting / Splicing | Not Required |
| Heating Function | Not Published / Not Advertised |
| Airbag / Occupancy Sensor Certification | Not Published |
| Package | 1 or 2 Ventilated Seat Cover(s) + Matching 12V Power Cable / Adapter for Selected Quantity |
Quick Answers
Which version is selected by default on the current source page? +
The current default selection is Model Y Juniper 2025+ with White (1 PC).
Is this a complete replacement seat cover? +
No. It is a removable ventilated cushion installed over the existing front-seat upholstery.
How many fans are inside each cover? +
Current manufacturer specifications list 10 high-speed fans per ventilated seat cover.
Does it blow refrigerated or air-conditioned air? +
No refrigeration system is published. The fans actively move cabin air through the seat cover to improve ventilation and reduce trapped heat and moisture.
Does it have seat heating? +
A separate active heating function is not published for this product. Its powered function is ventilation.
How do the three fan speeds work? +
Hold the button for approximately two seconds to power on, then tap to cycle through Red (Strong Wind), Green (Strong Cool Wind) and Blue (Soft Wind).
Does the cover turn itself off automatically? +
Current product imagery specifically states there is no automatic shutoff. Press and hold the control button until the indicator switches off before leaving the vehicle.
How is it powered? +
It uses the vehicle's 12V accessory / cigarette-lighter socket through the supplied fused power cable.
Will it work with every Tesla 12V outlet? +
Do not assume so. The current manufacturer specifically warns against using the product with the identified low-power outlet configuration rated for no more than 12A continuous (16A peak). Verify the exact outlet first.
What is the exact electrical power draw? +
The current manufacturer page does not publish a verified wattage or exact current draw, so this description does not invent those values.
How noisy is the ventilation system? +
The current manufacturer specification lists operating noise below approximately 40dB.
Does it fit Model 3 Highland? +
Yes. A dedicated Model 3 Highland 2024+ option is currently listed.
Does it fit Model Y Juniper? +
Yes. A dedicated Model Y Juniper 2025+ option is currently listed.
What is the difference between 1PC and 2PC? +
1PC provides one ventilated cover for one seat. 2PC provides two covers for both front seats, with a dual-output power connection shown in the current hardware imagery.
Does installation require modifying the factory seat? +
No cutting or permanent seat modification is specified. The cover is retained using buckles, a headrest attachment and lower hooks.
Is it officially certified for Tesla seat airbags and occupancy sensors? +
No independent airbag or occupant-sensor compatibility certification is published on the current product pages. Avoid obstructing original seat hardware, wiring and moving mechanisms during installation.
What materials are used? +
Current TESKAY product imagery identifies breathable mesh fabric, premium PU leather and an anti-slip base.
SKU: TSC006-YnewWH
