Teskay
Side Skirts Splitter ABS Rocker Panel for Tesla Model Y Juniper
Side Skirts Splitter ABS Rocker Panel for Tesla Model Y Juniper
Couldn't load pickup availability
ABS Side Skirts Splitter Rocker Panels for Model Y Juniper 2025+
Give the Model Y Juniper a lower, wider and more performance-inspired side profile with lightweight ABS rocker-panel extensions designed specifically around the refreshed 2025+ body shape.
Lower Sportline Appearance
Adds visual depth below the factory rocker panels, making the Model Y Juniper appear lower and giving the side profile a more aggressive performance-oriented stance.
Lightweight ABS Construction
Durable ABS provides a practical balance of low weight, flexibility and impact resistance for everyday exterior use.
Dual-Point Secure Mounting
Adhesive tape holds the skirt against the rocker-panel surface while screws secure the lower edge to the plastic undertray for improved stability.
Why These Juniper Side Skirts Stand Out
The shape follows the refreshed Model Y body line rather than using an older pre-Juniper or universal side-skirt profile.
Vehicle-specific shaping keeps the extensions positioned below the factory sill so the front and rear doors can continue operating normally.
Unlike an adhesive-only exterior trim piece, the lower screws add mechanical retention through the plastic underbody area.
Choose Glossy Black, Matte Black, Glossy Carbon Fiber Texture or Matte Carbon Fiber Texture to match the styling direction of your Model Y Juniper.
The required screw fastening is performed at the lower plastic undertray area, so the vehicle's metal body panels do not need to be drilled.
Carbon Fiber Texture Is Not Real Carbon Fiber
The Glossy Carbon Fiber Texture and Matte Carbon Fiber Texture versions are made from the same lightweight ABS construction with a hydro-dipped carbon-style finish. They are designed to provide the appearance of carbon fiber without the cost of a genuine dry-carbon component.
Built for the Model Y Juniper Side Profile
Secure Tape + Screw Installation
Thoroughly clean the rocker-panel installation area and remove dirt, wax, grease and moisture before fitting the skirts.
Hold each skirt against the vehicle before exposing the adhesive and confirm the front, rear and lower-edge alignment.
Remove the tape backing gradually while maintaining alignment, then press firmly across the adhesive area.
Install the supplied screws through the lower skirt mounting points into the vehicle's plastic undertray area for secure retention.
For best adhesion, avoid washing the vehicle for approximately 24โ48 hours after installation. The screws should still be installed; they are an essential part of the mounting system.
Specifications
| Attribute | Details |
|---|---|
| Product | Side Skirts Splitter ABS Rocker Panels |
| Vehicle Compatibility | Tesla Model Y Juniper 2025+ |
| Material | ABS Plastic |
| Listed Weight | Approx. 0.62 kg |
| Finish Options | Glossy Black / Matte Black / Glossy Carbon Fiber Texture / Matte Carbon Fiber Texture |
| Carbon Texture Material | Hydro-Dipped Carbon-Look ABS โ Not Real Carbon Fiber |
| Installation | Adhesive Tape + Screws |
| Metal Body Drilling | Not Required |
| Screw Location | Lower Plastic Undertray Area |
| Installation Time | Approx. 20โ30 Minutes |
| Package Includes | 2 ร Side Skirts / Adhesive Tape / Installation Screws |
Quick Answers
Will these fit the older 2020โ2024 Model Y? +
No. These side skirts are designed specifically for the refreshed Model Y Juniper 2025+ rocker-panel shape and are not intended for the previous Model Y body design.
Are the carbon fiber texture versions real carbon fiber? +
No. Both carbon fiber texture versions are ABS plastic with a hydro-dipped carbon-style surface. They provide the appearance of carbon fiber but are not genuine carbon composite parts.
Do I need to drill into the metal body? +
No metal body drilling is required. The included screws secure the lower edge through the plastic undertray area.
Can I install them using only the adhesive tape? +
The screws are an essential part of the installation. The adhesive helps position and bond the skirt to the rocker area, while the screws provide additional mechanical retention underneath.
How long does installation take? +
The listed installation time is approximately 20โ30 minutes when both sides are properly cleaned, aligned and secured.
Can I wash the car after installation? +
Yes. Allow approximately 24โ48 hours after installation for the adhesive to cure before using an automatic wash or pressure washing around the newly installed skirts.
What is included in the package? +
The set includes one left side skirt, one right side skirt, adhesive tape and the installation screws required for securing the lower edge.
SKU: sku-48629835890903
