K2 Industries
Silicone Hose 3-Ply 2.00" to 2.50" Reducer 45 Degree Black/Red
Silicone Hose 3-Ply 2.00" to 2.50" Reducer 45 Degree Black/Red
Couldn't load pickup availability
Silicone Hose 3-Ply 2.00" to 2.50" Reducer 45 Degree Black/Red
Premium silicone reducer hose bridges coolant or intake lines with a 45-degree angle and stepped diameter. Three-ply construction handles boost and coolant pressure without splitting. The tapered design (2.00" to 2.50") allows flexible routing around tight engine bays.
Key Features
- Stepped diameter (2.00" to 2.50") - Connects different hose sizes without adapters or couplers
- 45-degree bend - Routes around engine components with less kinking than straight reducers
- 3-ply silicone wall - Resists heat, oil, and coolant degradation over time
Specs
- Material: Silicone
- Configuration: 45-degree reducer hose
- Diameter: 2.00" inlet to 2.50" outlet
- Condition: New
Whats Included
- Silicone hose reducer (1 piece)
Frequently Asked Questions
Will this hose work with standard stainless hose clamps?
Yes. Use clamps rated for the hose diameter at each end — 2.00" clamps on the inlet side, 2.50" on the outlet. Torque evenly to prevent pinching the silicone.
Can I use this on a pressurized coolant system?
3-ply silicone is designed for coolant and boost applications. Make sure your clamps are tight and the hose sits fully on each barb before pressurizing.
Does the 45-degree angle take up less space than a straight reducer?
Yes — the bend lets you route around radiators, fans, or turbos without extra fittings. Measure your routing path before ordering to confirm the angle matches your layout.
SKU: K2-1341-UNV-006-TSARK
Share
