Teskay
Starlink Replacement Cable for Mini DC Power | Waterproof & Durable
Starlink Replacement Cable for Mini DC Power | Waterproof & Durable
Couldn't load pickup availability
Replacement DC Power Cable for Starlink Mini
Replace a damaged or worn Starlink Mini power cable with a direct-fit DC cable built for portable and outdoor setups. Featuring 18AWG copper wiring, an outdoor-rated connector design and three available lengths, it gives you a simple way to restore or extend your Starlink Mini power connection.
🔌 Direct Replacement Cable
Designed as a direct replacement power cable for the Starlink Mini, making it suitable for replacing a damaged, lost or worn original-style DC cable.
⚡ 18AWG Copper Wiring
Uses 18AWG copper conductors for reliable DC power transmission between a compatible power source and your Starlink Mini.
🌧 Outdoor-Rated Design
The supplier lists the cable as IP-rated for outdoor use and designed for environments where rain, moisture and changing weather conditions may occur.
📏 Multiple Length Options
Choose from 2M, 3M or 5M cable lengths to match different vehicle, RV, camping or fixed-installation layouts.
Simple Power-Cable Replacement for Starlink Mini
Replace a Damaged Cable
A practical replacement option if your existing Starlink Mini DC cable is lost, damaged or no longer suitable for your setup.
Choose the Reach You Need
Three available lengths make it easier to route power in RVs, vans, campsites, remote workstations and other portable installations.
Designed for Outdoor Use
The supplier describes the cable and connector assembly as suitable for outdoor Starlink Mini installations where moisture and weather exposure can occur.
Available Cable Lengths
| Option | Approx. Imperial Length |
|---|---|
| 2 M | 6.5 FT |
| 3 M | 9.84 FT |
| 5 M | 16.4 FT |
Suitable for Mobile & Outdoor Setups
| Application | Typical Use |
|---|---|
| RV / Van | Flexible routing between a compatible power source and Starlink Mini |
| Camping / Off-Grid | Portable Starlink Mini installations |
| Outdoor Installation | Provides additional routing flexibility outdoors |
| Marine / Boat Setup | Supplier-listed application for compatible installations |
Compatibility
| Device | Compatibility |
|---|---|
| Starlink Mini | Compatible |
| Other Starlink Systems | Not confirmed for this cable |
⚠️ Designed for Starlink Mini
This cable is specifically listed as a Starlink Mini replacement DC power cable. Do not assume compatibility with Starlink Standard, Gen 1, Gen 2, Gen 3, Flat High Performance or other Starlink hardware that may use different connectors or power requirements.
Cable Construction
| Attribute | Supplier Specification |
|---|---|
| Wire Gauge | 18AWG |
| Conductor | Copper |
| Connector | Starlink Mini-Compatible DC Barrel Connector |
| Outdoor Protection | IP-Rated for Outdoor Use |
Specifications
| Attribute | Details |
|---|---|
| Product Type | Replacement DC Power Cable |
| Compatibility | Starlink Mini |
| Wire Gauge | 18AWG |
| Wire Material | Copper |
| Connector Type | DC Barrel Connector |
| Available Lengths | 2M / 3M / 5M |
| Operating Temperature | -40°C to 85°C |
| Outdoor Rating | IP-Rated for Outdoor Use |
⚠️ Exact IP Number Not Published
The current supplier page describes the cable as IP-rated for outdoor use but does not publish a specific IP67, IP68 or other numerical ingress-protection rating. Do not advertise a specific IP level unless separately verified.
⚠️ Power Source Not Included
This product is a replacement cable only. A compatible Starlink Mini power source or power supply is required and is not included. The supplier page for this cable does not specify a fixed input voltage, current or maximum wattage, so verify your power source separately.
Package Includes
1 × Starlink Mini DC Power Cable
Cable length corresponds to the selected 2M, 3M or 5M option.
Basic Installation
1. Confirm Compatibility
Make sure the cable is being used with a Starlink Mini and a compatible DC power source.
2. Inspect the Connectors
Check both cable ends for dirt, moisture or damage before making the connection.
3. Connect the Starlink Mini
Insert the compatible DC connector fully into the Starlink Mini power connection.
4. Connect the Power Source
Attach the opposite end to your compatible Starlink Mini DC power supply.
5. Verify Operation
Power on the system and confirm the Starlink Mini starts and operates normally before completing permanent cable routing.
⚠️ Outdoor Installation
Keep connectors fully seated during outdoor use and avoid leaving disconnected electrical contacts exposed to standing water. Route the cable away from sharp edges, moving components and areas where it may be crushed, pinched or excessively bent.
Quick Answers
Is this cable for Starlink Mini?
Yes. The current supplier listing specifically identifies this as a replacement DC power cable for Starlink Mini.
What cable lengths are available?
The current product selector offers 2M (6.5 FT), 3M (9.84 FT) and 5M (16.4 FT).
What wire gauge is used?
The supplier specifies 18AWG copper wiring.
Is the cable waterproof?
The supplier lists the cable as IP-rated for outdoor use and describes it as suitable for wet-weather installations. A specific numerical IP rating is not published on the current page.
What is the operating temperature range?
The supplier lists an operating temperature range of -40°C to 85°C.
Does the package include a power adapter?
No. The current package listing includes one Starlink Mini DC power cable only.
Can it be used in an RV or van setup?
Yes. RV and van installations are specifically listed by the supplier as intended applications, provided the system uses a compatible Starlink Mini power source.
Does it work with other Starlink models?
This product is specifically listed for Starlink Mini. Compatibility with other Starlink systems is not confirmed and should not be assumed.
SKU: ACC-EC-0143-0001
Share
