Teskay
Tesla Model 3 / Y Center Console Wrap * Varity
Tesla Model 3 / Y Center Console Wrap * Varity
Couldn't load pickup availability
Center Console Cover / Wrap for Tesla Model 3 / Model Y / Model YL
Protect and refresh your Tesla center console with a model-specific overlay available in multiple materials and finishes. Choose the version that matches your exact console generation, then select from ABS, PP, TPU or 3M vinyl surface options.
🛡 Console Surface Protection
Adds a protective outer layer over the visible center-console surface to help reduce direct exposure to fingerprints, light scratches and everyday wear.
🎨 Multiple Surface Styles
Choose from pearl white, matte black, carbon-texture, wood-texture or transparent finishes depending on the selected material and vehicle generation.
📐 Generation-Specific Fit
Separate versions are offered for different Model 3, Model Y and Model YL console layouts rather than using one universal overlay.
🔧 Adhesive Installation
Depending on the selected version, the overlay installs over the original console using the supplied adhesive system without drilling or cutting.
Change the Console Appearance Without Replacing the Console
Protect the Original Surface
The overlay creates another layer between the factory center console and everyday contact from phones, keys, hands and other small items.
Refresh the Interior Style
Different materials and textures allow you to change the look of the console without replacing the factory assembly.
Preserve Normal Console Operation
When the correct vehicle version is selected and aligned properly, the cover is designed to fit around the original console layout and moving sections.
Current Vehicle Options
| Vehicle Version | Current Selector |
|---|---|
| Model 3 Highland | 2024+ |
| Model Y Juniper | 2025+ |
| Model YL | 2026+ |
| Model 3 | 2021–2023.10 |
| Model Y | 2021–2024 |
| Model 3 | 2018–2020 |
⚠️ Choose by Console Generation, Not Vehicle Name Alone
Tesla changed the center-console architecture across different Model 3 and Model Y generations. Do not assume that a cover for an earlier Model 3 or Model Y will fit Highland, Juniper or Model YL. Always select the exact vehicle generation shown in the product selector.
Current Material & Finish Options
| Selector Option | Published Material |
|---|---|
| Pear White | PP |
| Glossy Carbon Texture | ABS |
| Matte Carbon Texture | ABS |
| Matte Black | 3M Vinyl |
| Wood Texture | 3M Vinyl |
| Matte Carbon Texture | 3M Vinyl |
| Transparent | TPU |
| Pear White | ABS |
| Matte Black | ABS |
⚠️ “Carbon Texture” Is Not Real Carbon Fiber
The current selector specifically describes these versions as carbon texture on ABS or 3M vinyl. They should not be marketed as genuine carbon fiber, dry carbon fiber or forged carbon fiber.
Rigid Covers & Vinyl Wraps Are Different
Some selector options are molded ABS / PP / TPU covers, while others are 3M vinyl surface wraps. Installation feel, thickness and edge behavior can therefore differ depending on the selected material.
Published Cover Thickness
The supplier states that the molded protective panel uses an approximately 3mm-thick design intended to resist deformation during normal use.
Because the listing also includes thin 3M vinyl and TPU options, do not automatically apply the 3mm figure to every material variant unless confirmed for the selected SKU.
Everyday Center Console Protection
Fingerprints
Covers the original high-touch console surface where fingerprints and smudges can accumulate.
Light Scratches
Helps reduce direct contact with keys, phones and other small everyday items.
Surface Wear
Adds a replaceable outer layer over the original console finish.
⚠️ Not Scratch-Proof or Damage-Proof
The cover can help reduce routine surface wear, but it cannot prevent every deep scratch, impact, chemical stain or damage caused by sharp or heavy objects.
Installation Overview
1. Confirm Vehicle Generation
Before installation, make sure the selected cover matches your exact Model 3, Model Y or Model YL console layout.
2. Clean the Surface
Remove dust, fingerprints, wax and oils from the original center console.
3. Dry-Fit Every Piece
Place the cover or wrap over the console before exposing adhesive and check all edges, lids and openings.
4. Remove Adhesive Backing
Peel the liner from the supplied adhesive or vinyl backing.
5. Align Carefully
Start from one edge and position the material slowly to reduce misalignment.
6. Check All Console Functions
Open and close every lid or sliding section after installation and confirm that nothing catches or rubs.
⚠️ Dry-Fit Before Bonding
Do not permanently apply any panel until the vehicle generation, panel shape, cupholder area and moving console sections have been checked. Repeated removal after full adhesion may reduce adhesive performance or leave residue.
Removal Is Not Guaranteed to Be Residue-Free
The supplier promotes clean removal, but actual results can vary with heat, installation time, surface condition and adhesive age. Use controlled warmth and remove slowly if the cover needs to be taken off.
Designed to Preserve Console Functions
The supplier states that the correctly selected and installed cover is designed around the original console layout so normal opening and closing functions can remain available. Always verify operation after installation.
Published Package Contents
1 × Tesla Center Console Cover
1 × Sliding Drawer
1 × 3M Double-Sided Adhesive
Package Configuration May Vary by Version
The current product page lists one center console cover, one sliding drawer and one 3M double-sided adhesive in the package section. Because the listing now combines multiple console generations and both rigid-panel and vinyl options, confirm the exact contents of your selected SKU if package configuration is critical.
Specifications
| Attribute | Details |
|---|---|
| Product Type | Center Console Protective Cover / Surface Wrap |
| Published Materials | ABS / PP / TPU / 3M Vinyl |
| Model 3 | 2018–2020 / 2021–2023.10 / Highland 2024+ |
| Model Y | 2021–2024 / Juniper 2025+ |
| Model YL | 2026+ |
| Published Molded Thickness | Approx. 3mm for Molded Cover Design |
| Installation | Adhesive / Vinyl Overlay Depending on Selected Version |
Quick Answers
Which Tesla models are currently available?
The current selector includes Model 3 2018–2020, Model 3 2021–2023.10, Model 3 Highland 2024+, Model Y 2021–2024, Model Y Juniper 2025+ and Model YL 2026+.
What materials are available?
The current product selector includes ABS, PP, TPU and 3M vinyl options depending on the selected finish and vehicle generation.
Is the carbon-texture version real carbon fiber?
No. The current selector explicitly identifies those versions as carbon texture on ABS or 3M vinyl.
Does it fit Model YL?
Yes. The current vehicle selector includes a dedicated Model YL 2026+ option.
Does it fit Model 3 Highland and Model Y Juniper?
Yes. The current selector includes a shared Model 3 Highland 2024+ / Model Y Juniper 2025+ option.
Does installation require drilling?
No drilling is described. Installation uses adhesive or vinyl application depending on the selected version.
Is every version 3mm thick?
No. The supplier states a 3mm molded-panel design, but the listing also contains thin TPU and 3M vinyl variants, so the 3mm specification should not be applied to every option.
Will it affect the center console lids?
The supplier states that the correctly selected version is designed around the original console functions. Dry-fit first and confirm that every moving section opens and closes normally.
Can it be removed later?
Yes, but clean removal cannot be guaranteed in every case. Adhesive age, heat and original surface condition can affect residue and removal behavior.
What is included?
The current page lists one center console cover, one sliding drawer and one 3M double-sided adhesive. Because the listing combines multiple product constructions, confirm the selected SKU if exact package contents are important.
SKU: sku-50500928176343
Share
