Teskay
Tesla Model 3/Y Full Carbon Fiber Side Camera Covers
Tesla Model 3/Y Full Carbon Fiber Side Camera Covers
Couldn't load pickup availability
Real Carbon Fiber Full Side Camera Covers for Tesla Model 3 & Model Y
Give the Tesla side repeater cameras a more complete carbon-fiber appearance with full-surround covers made from genuine carbon fiber. Vehicle-specific HW3 and HW4 shapes wrap around the camera housing while preserving the camera lens and signal-light openings.
Genuine Carbon Fiber
Made from real carbon fiber rather than printed ABS or hydro-dipped plastic, delivering authentic weave depth and a more premium exterior finish.
Camera Opening Remains Clear
The vehicle-specific cutout surrounds the side repeater camera rather than covering the lens, provided the correct hardware version is selected and aligned properly.
Full Housing Coverage
Covers more of the triangular repeater housing than a small trim cap, helping shield the surrounding surface from everyday scratches, dirt and light contact.
Why These Full Side Camera Covers Stand Out
The cover follows the full outer contour of the triangular side-camera housing for a more integrated carbon-fiber appearance.
Tesla changed the side repeater camera housing between hardware generations. Separate shapes are supplied so the camera opening can remain correctly centered.
The current package includes a matched left/right pair for both front-fender side repeater camera housings.
Choose Glossy, Matte, Red Carbon Fiber or Glossy Forged Carbon Fiber to coordinate with other exterior carbon accents.
Installation uses automotive double-sided adhesive, so the original repeater camera assembly does not need to be removed or replaced.
Camera Hardware Comes Before Model Year
Tesla hardware changeovers can vary around production transition dates. Use the listed years as guidance, then confirm HW3 or HW4 through your vehicle information and compare the physical camera housing before ordering.
Real Carbon Fiber Around the Entire Repeater Housing
Reflective clear finish with a highly visible traditional woven carbon pattern.
Lower-reflection surface for a more understated factory-style carbon appearance.
Colored carbon weave for a more noticeable performance-inspired exterior accent.
Irregular forged-style carbon pattern with a more dramatic flake appearance than conventional woven carbon.
Confirm HW3 or HW4 Before Installation
Check Controls → Software → Additional Vehicle Information where available and compare your repeater-camera housing with the product images.
Place the left and right covers over the housings without exposing the adhesive and verify that every outer edge sits flat.
Confirm the camera aperture and repeater-light opening are centered and completely unobstructed before bonding the cover.
Remove wax, oil, dust and moisture from the original housing and allow the surface to dry fully.
Align the camera opening first, then press the cover evenly around its entire perimeter to establish a secure adhesive bond.
After installation, inspect both side-camera feeds and confirm there is no obstruction, edge intrusion, unusual reflection or warning.
Tesla hardware transitions can occur during a model year. A reddish tint on an HW4 camera may be a useful visual clue, but it is not sufficient by itself. Confirm the actual hardware and camera-housing shape before applying adhesive.
This is an exterior overlay. Installation does not require removing the original side repeater camera, disconnecting vehicle wiring, drilling or vehicle coding.
Specifications
| Attribute | Details |
|---|---|
| Product | Full Side Camera / Repeater Housing Covers |
| Material | 100% Real Carbon Fiber |
| Dry Carbon | Not Specifically Published as Dry Carbon |
| HW3 Fitment | Model 3 2021–2023.10 / Model Y 2020–2024 |
| HW4 Fitment | Model 3 2023.11+ / Model Y 2025+ |
| Model 3 Highland | Covered by HW4 Group — Confirm Actual Camera Hardware |
| Model Y Juniper | Covered by HW4 Group — Confirm Actual Camera Hardware |
| Model YL | Manufacturer Lists Model YL 2026+ in HW4 Group |
| Finish Options | Glossy Carbon Fiber / Matte Carbon Fiber / Red Carbon Fiber / Glossy Forged Carbon Fiber |
| Quantity | 2 Pieces — Left + Right |
| Coverage | Full Outer Side-Repeater / Camera Housing Surround |
| Camera Lens Opening | Dedicated Open Cutout |
| Repeater / Signal-Light Opening | Preserved by Vehicle-Specific Cover Geometry |
| Installation | Adhesive Overlay |
| Adhesive | 3M Double-Sided Tape Listed |
| Camera Removal | Not Required |
| Wire Cutting / Splicing | Not Required |
| Drilling | Not Required |
| Vehicle Coding | Not Required |
| Published Dimensions | Not Published |
| Published Weight | Not Published |
| Package Contents | 1 Pair × Side Camera Covers + 1 × Listed 3M Tape Item |
Quick Answers
Is this real carbon fiber or carbon-look ABS? +
It is listed as genuine / 100% real carbon fiber. This is not the carbon-fiber-pattern ABS side-camera cover.
Is it dry carbon fiber? +
The current product pages confirm real carbon fiber but do not specifically identify this product as dry carbon fiber, so this description does not make that additional claim.
Does the supplied link select a specific variant? +
No variant ID was included in the supplied URL. The source page currently defaults to HW3.0 with Glossy Carbon Fiber, but you should select the hardware and finish that match your actual vehicle.
What is the difference between HW3 and HW4? +
HW3 and HW4 use different repeater-camera housing shapes, so their carbon covers are not interchangeable. The camera opening must match the actual hardware generation.
Which vehicles are currently listed for HW3? +
Current manufacturer selector guidance lists Model 3 2021–2023.10 and Model Y 2020–2024 under HW3.
Which vehicles are currently listed for HW4? +
Current manufacturer selector guidance lists Model 3 from 2023.11 onward, Model Y from 2025 onward and Model YL 2026+ under HW4.
Does this fit Model 3 Highland? +
The current source places Model 3 from 2023.11 onward in the HW4 group, which includes Highland-era vehicles. Confirm that your actual side-camera housing is HW4 before ordering.
Does this fit Model Y Juniper? +
Current manufacturer guidance places Model Y 2025+ in the HW4 group. Confirm the actual camera hardware and housing shape before ordering for Juniper.
Can I identify HW4 just by a red camera lens? +
A reddish camera-lens tint can be a clue, but it should not be used as the only identification method. Check the vehicle hardware information and compare the housing shape.
Will the cover block the side camera? +
A correctly selected and aligned cover is designed to leave the lens opening unobstructed. Always inspect the live camera feed after installation to confirm there is no interference.
Does it affect the side repeater light? +
The correct cover includes dedicated clearance around the light area. Dry-fit first and confirm the light opening is unobstructed before exposing the adhesive.
Do I need to remove the original side camera? +
No. These are adhesive overlays installed over the exterior repeater-camera housing.
How many covers are included? +
The current package contains one left cover and one right cover, plus the listed 3M adhesive item.
Can the covers be removed later? +
Yes, but removal effort and adhesive residue can vary with installation time, temperature and surface preparation. Use careful automotive-detailing methods rather than forcing the cover off.
Are dimensions or weight published? +
No verified overall dimensions or product weight are currently published, so this description does not invent those specifications.
SKU: TSL3606
