Under Seat Air Vents Cover for Model Y Juniper / Model YL

Under Seat Air Vent Covers for Tesla Model Y Juniper / Model YL

Protect the exposed under-seat rear air vents and surrounding carpeted area with a low-profile grille designed specifically for refreshed Tesla Model Y interiors. The open vent pattern helps keep shoes, dirt and loose debris away from the factory ducts while maintaining rear-cabin airflow.

Protect an Easily Exposed Under-Seat Area

Factory Vents Stay Covered
The grille sits over the exposed rear air-vent area so shoes and loose items are less likely to make direct contact with the vent opening.

Protect the Surrounding Carpet
The extended shape also covers more of the nearby carpeted / suede-style under-seat area where dirt and shoe marks commonly accumulate.

Integrated Interior Appearance
The low-profile black design is intended to sit discreetly beneath the seat rather than appearing as a bulky external accessory.

Vehicle Compatibility

⚠️ Not for Pre-Juniper Model Y

This product is molded around the refreshed Model Y Juniper / Model YL under-seat area. Do not assume compatibility with the earlier Model Y 2020–2025.03 interior, as the seat base and vent geometry differ.

Model YL Compatibility Confirmed

The current Tesery product title and fitment information explicitly list Model YL 2026+ in addition to Model Y Juniper 2025+.

Designed Around Factory Airflow

The protective panel uses an open grille instead of a solid cover so conditioned air can continue passing through the factory under-seat duct.

The supplier describes the grille as designed for balanced rear airflow while reducing direct blockage from debris.

⚠️ Keep the Grille Openings Clear

Do not place bags, mats, clothing or other objects directly against the protector. Any physical obstruction over the grille can reduce airflow regardless of the cover design.

Anti-Blocking Grille Design

The grille helps stop larger loose items and debris from entering the exposed vent opening while allowing air to pass through the patterned openings.

Not a Fine-Particle Air Filter

This accessory is a physical grille protector, not a cabin-air filter. It is designed to block larger debris and direct contact and should not be described as HEPA, PM2.5 filtration or an air-purification product.

Softer ABS Construction

The supplier specifies ABS construction with a comparatively softer composition inspired by its Plaid-style reference design.

The softer material is intended to reduce hard-plastic contact noises such as squeaking or rattling around the under-seat area.

Noise Reduction Is Design-Dependent

The supplier states that the softer ABS composition is intended to reduce squeaking and rattling compared with harder vent-cover designs. Actual cabin noise can vary with fitment, road conditions and surrounding trim.

Plaid-Inspired Design

Tesery describes the styling and softer material concept as inspired by the factory high-performance Plaid design. This is an aftermarket accessory and should not be represented as a genuine Tesla Plaid factory component.

Washable & Easy to Clean

The ABS surface can be removed and wiped with a damp cloth to clean off dust, dirt and shoe marks.

The supplier also describes the ABS material as waterproof, allowing the removed covers themselves to be rinsed when necessary.

⚠️ Protectors Are Washable — Vehicle Vents Are Not

If rinsing the covers, remove them from the vehicle first and dry them completely before reinstalling. Do not pour water into or around the factory under-seat air ducts, seat wiring or electrical components.

Extended Under-Seat Coverage

Unlike a small vent grille that only covers the duct opening, this design extends around the surrounding under-seat area.

The supplier specifically describes the product as providing anti-kick and anti-dirt coverage for the nearby suede-style carpeted section as well as the vent opening.

Buckle-On Installation

1. Move the Front Seat for Access
Adjust the seat to create enough working space around the rear-facing under-seat vent.

2. Identify the Left & Right Covers
Match each protector with the corresponding under-seat area.

3. Align the Vent Grille
Make sure the openings line up with the factory air outlet.

4. Engage the Buckles
Press the protector into its intended mounting position until the retaining points sit securely.

5. Check the Edges
Confirm that the protector sits evenly around the surrounding carpeted area.

6. Test Seat Movement & Airflow
Move the seat through its normal adjustment range and operate the climate system to confirm there is no interference.

No Adhesive Required

The hidden buckle design secures the protector mechanically, so no glue, double-sided tape, drilling or permanent modification is required.

⚠️ Confirm Full Seat Movement After Installation

After installing both covers, move the front seats forward and backward through their usable range. If either protector contacts a seat rail, wiring harness or moving seat component, stop and check the installation position.

⚠️ Keep Clear of Under-Seat Wiring

Do not force the protector against electrical connectors, seat wiring, sensors or rail mechanisms beneath the front seats. The cover should protect the vent area without pinching or relocating factory components.

Color

Cleaning & Maintenance

Routine Dust
Wipe the grille and outer surface with a clean microfiber cloth.

Embedded Debris
Remove loose debris from the grille openings so airflow remains unrestricted.

Deeper Cleaning
Remove the covers before rinsing or using a damp cloth.

Dry Before Reinstallation
Allow the covers to dry completely before placing them back around the factory vents.

Specifications

⚠️ Unpublished Specifications

The current product page does not publish exact dimensions, ABS thickness, product weight, ABS grade, tested airflow percentage, noise-reduction value or temperature rating. Do not add these specifications unless separately confirmed for this exact product.

Package Includes

2 × Under Seat Air Vent Covers

Quick Answers