Universal Leg Rest Cushion for Tesla Model 3/Y/S/X Seats

Leg Rest Cushion for Tesla Model 3 / Y / S / X

Add extra support beneath your thighs and legs with a seat-mounted leg rest cushion designed for compatible Tesla front seats. A soft Nappa leather surface, high-density memory foam and micro-perforated construction create a more comfortable extension to the original seat cushion for everyday driving and longer trips.

Extend the Front Edge of the Seat

Additional Thigh Support
The cushion adds extra padded surface in front of the factory seat cushion to support more of the upper-leg area.

Softer Seating Surface
High-density memory foam adds cushioning over the original seat edge.

Long-Drive Comfort
The supplier states that the added support can help reduce leg pressure and fatigue during longer drives. Individual comfort will vary with body size, seating position and seat adjustment.

⚠️ Comfort Accessory — Not a Medical Device

This cushion is intended to provide additional seating support and comfort. It is not a medical device and should not be described as treating knee pain, circulation problems, back conditions or other medical issues.

Material & Construction

⚠️ Nappa Leather Is the Supplier's Material Description

The supplier describes the outer surface as Nappa leather but does not publish a detailed leather grade, tanning specification or independent material certification. This listing follows the supplier's stated material description without adding unsupported leather specifications.

Water-Resistant Surface

The supplier describes the outer surface as water-resistant to help with everyday spills and routine cleaning. Wipe liquid away promptly rather than allowing it to remain on or soak into the cushion.

Color Options

Quantity Options

Vehicle Compatibility

⚠️ Not Compatible With Integrated One-Piece Seat Designs

The supplier specifically states that this cushion is not compatible with seats that use an integrated one-piece seat design. Please compare your seat structure carefully before ordering.

⚠️ Remove Existing Seat Covers Before Installation

The supplier states that this leg rest cushion will not fit correctly over seats that already have aftermarket seat covers installed. Remove the existing seat cover before fitting the cushion.

Designed Around Heated & Ventilated Seats

The supplier states that the micro-perforated construction is designed to work with compatible Tesla seat heating and ventilation systems.

Actual airflow and heat transfer may vary depending on vehicle configuration, cushion position and whether the factory seat is equipped with those features.

⚠️ Seat Heating / Ventilation Performance May Vary

Any added cushion creates another layer between the occupant and the factory seat surface. Heating speed and ventilation airflow may therefore differ from the uncovered factory seat.

Tool-Free Strap Installation

1. Confirm Seat Compatibility
Check that the seat is a compatible design and does not have an aftermarket seat cover installed.

2. Position the Cushion
Place the leg rest cushion against the front edge of the seat so the padded section sits evenly beneath the thighs.

3. Route the Pre-Fitted Straps
Route the attachment straps only through the intended accessible areas around the seat structure.

4. Secure the Cushion
Fasten the straps firmly enough to prevent unwanted movement without pinching wires or interfering with seat components.

5. Adjust the Position
Sit in the seat and reposition the cushion until the leg support feels natural.

6. Test the Seat
Move the seat through its normal forward, backward, height and recline adjustments and confirm that the cushion and straps remain clear of all moving components.

⚠️ Keep Straps Clear of Seat Rails, Wiring & Moving Parts

The supplier instructs that the pre-fitted straps attach around the seat-rail area. During installation, make sure no strap passes through, wraps around or interferes with moving rails, motors, electrical wiring, connectors or other seat mechanisms.

⚠️ Do Not Interfere With Seat Safety Systems

Do not position straps or cushion material over seat-mounted airbags, seat-belt anchor points, buckle hardware, occupancy sensors or electrical connectors. Remove the accessory if it interferes with any factory seat or restraint function.

Non-Slip Base

The supplier specifies a non-slip base designed to help reduce cushion movement during normal driving when the cushion is correctly positioned and secured.

Specifications

⚠️ Exact Dimensions & Foam Density Are Not Published

The current supplier page does not publish the cushion's exact dimensions, thickness, foam density, weight or a tested load rating. Do not add numerical specifications unless they are separately confirmed for this exact product.

Cleaning & Care

Wipe light dust and everyday marks with a clean, soft microfiber cloth.

For small spills, wipe the surface promptly with a slightly damp cloth.

Avoid soaking the memory foam or using harsh solvents, bleach or abrasive cleaners. Allow the cushion to dry completely before continued use.

Package Configuration

1PC Option: 1 × Leg Rest Cushion

2PCS Option: 2 × Leg Rest Cushions

Quick Answers