Teskay
Wall Mount Kit for Starlink Gen 3 Router & Power Adapter
Wall Mount Kit for Starlink Gen 3 Router & Power Adapter
Couldn't load pickup availability
Split Wall Mount Kit for Starlink Gen 3 Router & Power Supply
Move your Starlink Gen 3 router and power supply off the desk and onto the wall with a custom-fit split organizer that keeps both components secure, accessible and easier to cable-manage without enclosing them inside a bulky cabinet.
Gen 3-Specific Fit
Shaped specifically around the Starlink Standard Gen 3 UTR-32 router and its matching V3 power supply instead of using a loose universal shelf.
Cleaner Cable Management
Lifts both Starlink components away from desks, floors and countertops while providing space behind the bracket for routing and storing excess cable.
Adhesive or Screw Mounting
Use the supplied adhesive pads on suitable smooth surfaces or install the bracket with screws and wall anchors when a more permanent mounting method is preferred.
Keep the Router & Power Supply Together — Without Boxing Them In
The router sits in the upper cradle while the power supply occupies a dedicated lower support, keeping both parts organized in one compact wall-mounted area.
The router and power supply remain largely exposed rather than being enclosed inside a sealed box, helping preserve natural airflow around the devices.
Excess power cable can be routed behind the bracket so the visible installation remains cleaner and less cluttered.
The V3 power supply slides into the lower retention section instead of simply resting loose on a generic shelf.
Suitable for organized home, office, gaming-room, garage, RV or other installations where the Starlink networking hardware is mounted to a stable interior surface.
This Is Not a Starlink Dish Mount
This bracket holds the Starlink Gen 3 router and power supply indoors. It does not mount the Starlink dish to a roof, pole or exterior wall and does not replace the antenna's original stand or mounting hardware.
Built Around Starlink Standard Gen 3 Hardware
Manufacturer-listed ABS construction provides a lightweight molded structure designed around the router and power supply.
Both main Starlink components remain exposed to ambient air rather than being enclosed inside a solid cabinet.
The design leaves the router and power connections accessible for plugging in or disconnecting network and power cables.
Two Mounting Methods for Different Surfaces
Adhesive Installation
Use the supplied 3M adhesive pads on suitable smooth, clean surfaces such as glass or glazed ceramic tile. Surface condition and adhesive suitability should be verified before relying on adhesive-only mounting.
Screw-Mounted Installation
For a more permanent setup, secure the bracket with the supplied screws and expansion anchors using fasteners appropriate for the wall material.
Mount the ABS bracket to a suitable flat surface using the selected adhesive or mechanical fastening method.
Insert the Starlink V3 power supply into the lower retention slot until it is seated securely.
Route or store excess power cable behind the bracket before installing the router.
Connect the required Starlink network and power cables while the ports remain easily accessible.
Align the UTR-32 router with the upper cradle and press it down into its retained wall-mounted position.
Leave reasonable clearance around the hardware and verify that no cable is sharply bent, pinched or pulling against a connector.
Adhesive performance depends on surface material, cleanliness, temperature and load. For painted drywall, textured walls, moving RV installations or other demanding environments, mechanical fastening is generally the more secure mounting method.
Specifications
| Attribute | Details |
|---|---|
| Product | Starlink Gen 3 Router & Power Supply Split Wall Mount Kit |
| Compatible System | Starlink Standard Gen 3 / V3 |
| Router | Starlink Gen 3 UTR-32 Router |
| Power Supply | Starlink V3 Power Supply / Power Adapter |
| Standard Actuated | Not Compatible |
| High Performance | Not Compatible |
| Flat High Performance | Not Compatible |
| Starlink Mini | Not Designed for This Mount |
| Main Material | ABS Plastic |
| Design | Split Router / Power Supply Wall-Mount Layout |
| Approx. Main Bracket Width | 6.72 in |
| Approx. Main Bracket Height | 5.36 in |
| Published Depth | Not Published |
| Published Product Weight | Not Published |
| Published Load Rating | Not Published |
| Adhesive Mounting | Supported on Suitable Smooth Surfaces Using Supplied 3M Pads |
| Mechanical Mounting | Screws + Expansion Anchors |
| Cable Management | Rear Cable Storage / Routing Space |
| Active Cooling | No |
| Passive Airflow | Open Split Design |
| Signal / Speed Increase | No Quantified Performance Gain Published |
| Package | Split Wall Mount Bracket + Adhesive Mounting Pads + Screw / Expansion-Anchor Hardware |
Quick Answers
What exactly does this mount hold? +
It is designed to hold the Starlink Standard Gen 3 UTR-32 router together with its matching V3 power supply.
Does this mount the Starlink dish? +
No. It is an organizer for the indoor router and power supply, not a roof, pole or exterior dish mount.
Does it fit Starlink Gen 3? +
Yes. It is specifically designed around the Standard Gen 3 router and V3 power supply.
Does it fit Starlink Mini? +
No. Starlink Mini uses different hardware dimensions and is not listed for this mount.
Does it fit the older Standard Actuated Starlink? +
No. Current manufacturer compatibility imagery specifically excludes Standard Actuated equipment.
Does it fit Starlink High Performance? +
No. High Performance and Flat High Performance equipment are not listed as compatible with this Gen 3 router mount.
What is the mount made from? +
The current manufacturer specification lists high-quality molded ABS plastic.
Can I install it without drilling? +
Yes, on suitable smooth surfaces the manufacturer provides 3M adhesive pads as a no-drill option. Adhesive mounting is not suitable for every wall material.
Can it be screwed to the wall? +
Yes. The kit also includes hardware for a more permanent screw-and-anchor installation.
Can I use the adhesive mount on painted drywall? +
Adhesive performance on painted drywall varies and may pull paint or lose adhesion. Mechanical fastening is generally the more secure option for drywall installations.
Does the mount improve Wi-Fi speed? +
The mount can help position and organize the router, but no verified Wi-Fi speed, range or throughput increase is published. Actual wireless performance depends on router placement, building materials, interference and network conditions.
Does the split design improve cooling? +
Its open construction preserves passive airflow around the router and power supply compared with enclosing them inside a closed box. No measured temperature reduction is published.
Can it be used in an RV? +
The manufacturer lists RV use as an application. For a vehicle exposed to vibration and movement, use a secure mechanical mounting method rather than relying only on adhesive.
Is the mount waterproof? +
No specific IP waterproof rating is published for this mount. More importantly, the Starlink router and power equipment should be installed according to their own environmental and ventilation requirements.
Are weight and load capacity published? +
No verified bracket weight or rated load capacity is currently published, so this description does not invent those values.
SKU: SBR003
